What Did You Do To Your 3rd Gen Today?
- Thread starter pin8246
- Start date
- Status
1985taylor1925
Senior Member
SCRunner12
New member
Bought 3 Bridgestone Dueler 285/75/16 AT's for $50. 2 are 60% and the other is 80%. There is a 4th at 80%, but the tire shop took a chunk out of the sidewall. Pretty pumped as I can have a great set for roughly $300 if I buy a new tire.
Just a tad bigger....
I'll get better pictures tomorrow when its light out. Now to find a 4th.
Just a tad bigger....
I'll get better pictures tomorrow when its light out. Now to find a 4th.
Last edited:
can you please give us a write-up with photos (maybe a new thread)?
Dark Lord
New member
Wow, that doesn't even look real! I thought it was photoshopped at first!
kball
New member
Sorry I didn't take any pics this time...
I bought this switch at radio shack
SPST 3-Amp Soft-Feel Push On-Push Off Switch : On-Push Off Switches | RadioShack.com
Got some 18 gauge wire and soldered about 2 feet onto each of the switch prongs. Then at the radio there is a blue wire that actually says ANT POWER right on it. Cut that wire and attached the switch wires to it. Drilled a hole in the shifter cover and mounted the switch there next to my trans temp gauge.
dirtbike250x
New member
iswingping
New member
Tb mod
Just did the Tundra Brake mod. No longer a daily driver and just starting some mods. This is now the brake mod and the console swap for 2012.
Just did the Tundra Brake mod. No longer a daily driver and just starting some mods. This is now the brake mod and the console swap for 2012.
BlackCat914
New member
gave it a good wash and undercarriage blast to get all the salt off of it. F winter.
Brilliant
New member
just a follow on from the other day. I checked the modified cupholder for fit today and cut out the console. Better fit than expected. I can easily use the top switch blank (shown with a 1.25" putty knife).
I just had to remove the pocket and do a minor trim. Goes in and out easy with switches inserted so it wont be a cluster F to get it in and out.
details are in my thread and I do have a 99 cupholder for sale for $10 bucks + a flat rate box if anyone is feeling crafty
I just had to remove the pocket and do a minor trim. Goes in and out easy with switches inserted so it wont be a cluster F to get it in and out.
details are in my thread and I do have a 99 cupholder for sale for $10 bucks + a flat rate box if anyone is feeling crafty
Last edited:
PitbullRescuer
New member
Made and installed these.
along with LC shocks, extended bump stops and raised the front end.
Details please.
jmildoc
New member
just a follow on from the other day. I checked the modified cupholder for fit today and cut out the console. Better fit than expected. I can easily use the top switch blank (shown with a 1.25" putty knife).
I just had to remove the pocket and do a minor trim. Goes in and out easy with switches inserted so it wont be a cluster F to get it in and out.
details are in my thread and I do have a 99 cupholder for sale for $10 bucks + a flat rate box if anyone is feeling crafty
I'm interested in that. Please pm me pics.
- Status
Similar threads
