4RunnerFanatic
New member
They are just hanging for now, I thought they would rattle but I just drove down a bumpy dirt road and there was no rattling that I could hear inside the cabin...
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Runer4Life
Member
I installed N-Fab Nerf Step Bars.
I also placed a nice message for my passengers.
I also placed a nice message for my passengers.
Mistaken
New member
Looks good!
spaghetti_sandwich
New member
How much work was it to take the front bumper off?
When my light bar shows up I'll have to take the bumper off to get in there so wondering what I'm in for lol
Also was it tough to get your hands on a TRDpro grill? I've been interested in one since I got my 4runner.
8084runner702
New member
Sweet! Do you happen to have any pictures of the brackets you made for the light bar and how it's mounted? Thanks
jbjones85
New member
Went out to Corolla 4x4 Beach for the first time and explored. I didn't realize all of the roads out here were all the beach houses are were all sand.
Nice, I want to get out there so bad just never seem to have the time. How did she handle it?
313n703
New member
Lowered my tires down to 25 lbs, put her in L4H, and had no issues what so ever driving around. I may lower tires down more the next time. I also need to invest in an air compressor. Looking for a gas station with an air pump was a pain and $1 to pay for air is expensive.
BradBrad619
New member
Here are the custom mounts. I drilled and tapped the lower aluminum bumper crossmember to fasten the mounts to the truck.
Attachments
Styer
New member
Going back to Discount Tire again today, a different one though. Did confirm that the original shop did have the Toyota specific mounting plate. Even though the vibrations got better. The shimmy in the steering wheel is still present over 60mph. Sometimes even shows up around 55-57mph. Not super happy with these Cooper AT3s at the moment. Probably the last chance I'll let them have to git them right before I start pushing for a return.
Last edited:
bloodninja
New member
Slime 40026 2X Heavy Duty Direct Drive Tire Inflator https://www.amazon.com/dp/B005Z8HAUK/ref=cm_sw_r_other_awd_uLbEwb75QB72Z
4RnR Grl
New member
I need that sticker in my life.I installed N-Fab Nerf Step Bars.
I also placed a nice message for my passengers.
codyHTX
Member
picked up a set of N-FAB steps to pass along to [MENTION=118406]Haydenatx[/MENTION] from [MENTION=115953]HerT4R[/MENTION] on friday.
first time hanging out w a fellow forum member, we even got to do a little impromptu off-roading, followed by a lot of power washing
her rig is badass too, that '10-'13 slimline hybrid bumper prototype is awesome and we seem to have similar taste in sliders
first time hanging out w a fellow forum member, we even got to do a little impromptu off-roading, followed by a lot of power washing
her rig is badass too, that '10-'13 slimline hybrid bumper prototype is awesome and we seem to have similar taste in sliders
Attachments
Seattle206
Senior Member
Super easy. Pop the hood, remove the plastic tabs and one metal screw. Unscrew the bolts on the bottom and wheel well area. Unplug the fogs. Start pulling on one side of the wheel well. There is that top notch on the wheel well that helps keep the bumper in place. Once you pull the bumper off that notch the whole thing will come off with ease. Just have both hands ready or have another set to assist cause it might off fall off if you're not careful.
As for the garnish I got it used for $450 shipped, including the front valance. Not a bad deal.
Mistaken
New member
If you would like to keep that tire, have them order a new set and start fresh. That is what they offered me when I was in your shoes.
Titanpat57
Senior Member
Nice work!
Similar threads
