|
Junior Member
|
|
Join Date: Dec 2007
Location: Las Vegas, NV
Posts: 16
|
|
Junior Member
Join Date: Dec 2007
Location: Las Vegas, NV
Posts: 16
|
Pull the white connector out from the back of the power port and cut the wires. Connect the inverters wires to the wires for the power port, keeping in mind which wires are positive and negative. I used 3M three way connectors, but plain old electrical tape would do. It would also help to extend the short power port wires, otherwise it will look like a tangled mess as shown here.
__________________
<p>2007 Sport 4x4 V6 Black</p>
|