|
Elite Member
|
|
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,496
|
|
Elite Member
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,496
|
Tapping that switched ground in the overhead light is a little bit of a trick, as it is totally internal to the light fixture--no wire, just a short brass strap from switch to bulb. In my case, I have an adapter in place of the bulb to wire in a flat panel LED. Using one of those gives you a wire to tap--might make it easier to tap and the LED in the dome is great.
Good research and planning on your project. I want to see how you get a wire from the dome to the foot.
__________________
'99 4Runner SR5 5spd 3.4L V6 4WD(U.S), original '99 Talls in front, OME 906s in back, Hella fogs, Trekmaster shocks in front, Billy in back, no running boards, FIAMM horns, Alpine sound, Michelin LTX M/S2's, owned since new.
'97 HiLux SW4 5spd 4WD(Japan model bought in Brazil assembled in Argentina, very close to a 3.0 4Runner/Surf)
'71 FordWillys Jeep CJ5 (with straight six Ford Maverick 3.0 liter engine--lives in the mountains north of Sao Paulo Brazil)
My Backyard Frame Swap
Last edited by TheDurk; 04-01-2015 at 06:16 PM.
|