Quote:
Originally Posted by Sloweuroll
Hello, sorry for any confusion but I am just selling the black insert. I was just stating where I found the oak housing I bought. I will re read my OP and see if there is anything I can re-word. Thanks!
|
Got it, thanks! But what is the housing, it's not a standard 4Runner overhead console, is it? Is it one of those Field Monitor Unit housings?
If so, I'd reword your first post like this (just a suggestion of course):
Quote:
Hello everyone! I have just completed designing a Scangauge2 mount for use with a JDM Field Monitor Unit. This mount is completely designed and 3D printed by myself.
I realize not a whole lot of people have FMU overhead console standard in their vehicles, but they are easily found on eBay for around $30, and then you can install my mount into it.
I also used a simple ethernet extension cable for this to be able to hide the cable under the a pillar trim and headliner. If you'd like one for yourself feel free to PM me here or find my page on facebook: 2CM - Chris Chandler Making & Motorsports.
|
__________________
1997 4Runner Limited 4WD E-Locker ~200k | Falken Wildpeak A/T3W 265/75/16 | Pro Comp 69 16x8 | OME 2906 | B&M 70264
Addicted Offroad Front Bumper | Spiker Engineering High-Lift Hood Struts and Ultragauge Mount
