|
Member
|
|
Join Date: Jul 2017
Location: Chattanooga, TN
Posts: 59
Real Name: Wes
|
|
Member
Join Date: Jul 2017
Location: Chattanooga, TN
Posts: 59
Real Name: Wes
|
5thGen Suspension pre-loads/ride height/315s
Hello all, I’m in a bit of a dilemma with suspension choice. I’ve done a bit of reading on here between ICON lifts and Toytec Boss lifts. I have a 5th Gen that I’m currently working with to mount 315s (BFG AT KO2’s, since they measure slightly shorter than other 315s). I’ve been firm on ICON stage 2 or 3 since they offer 0-3.5” but after endless research I’ve discovered that in fact you do not get 3.5 inches of lift with ICON ( may be with any lift, why I’m here) and that you may be lucky to get 2 inches since you’re limited to the amount of preload you can put on it.
My question is which lift will provide the most clearance?
Would going with heavier springs provide a little more height? I do not have bumpers, if anything I’ll do a LoPro with winch in the future.
Any and all advice is welcome!
|