Quote:
Originally Posted by Deep_palancar
You must clear the old data prior to performing the calibration.
The procedure document is attached. Read through the steps several times and plan ahead; note that the final step requires driving straight at 25mph for 10 seconds.
Get yourself a mini VCI and a copy of techstream even if this event is cured with
the jumper method, it's a must have item if you are going to own and work on Toyotas.
|
I am printing these directions right now. I have read before that the codes MUST be cleared. I was searching for these directions! I really appreciate it! I will report back. Thank you, again.
And yes, I need the TechStream!