Quote:
Originally Posted by 5point9limited
So, I am "unsuccessful" in trying this reset. I used the Techstream program. I followed the directions the best I could, other than the fact that I was unable to drive for 25mph for 10 seconds.
However, the VSC light never flashed upon the reset process. Only the ABS light did. When I jumped the terminals with a paperclip, the light DID flash.
Also, using techstream, it states that I need to select the "Skid Control ECU" to clear the Zero Point Calibration. I cannot find that menu. I feel like that may be the missing link.
Any input is appreciated. I will be trying again in the coming days. This is frustrating!
|
You MUST clear the old data:
(7) Enter the following menus: Chassis / ABS/VSC/TRAC / Utility / Reset Memory.
(8) Select the skid control ECU to clear the zero point calibration data using the Techstream.
(9) Turn the ignition switch off.