Installed and did the hard routing for the backup cam in prep for the stereo install.
1. Take off the spoiler - 2 plastic bolt covers, 2 10mm bolts, and one wiring harness - it's outta here.
2. Mark the location for drilling... This backup cam was on a post (scroll down a few pictures) so one hole install is all it needed.
3. Drill da hole
4. Get creative with double sided tape for sealing purposes, then bolt it on.
5. Route the wire through the top of the hatch and through the rubber channel - lube and stiff wire is your friend!
6. Reinstall the spoiler with the wires run down to the taillight and button up for a later day. Hard part's done
Sent from my VS988 using Tapatalk