Quote:
Originally Posted by Off-Camber
Good call. I simply got 2 stainless bolts that had the same thread pattern, pumped a little clear silicone into the holes and then installed the screws. After cutting the rear plate light power wire it looks normal.
|
Totally forgot to mention that about the lights. I pulled the bulbs, but yeah it looked pretty silly with them shining on a missing plate.
Quote:
Originally Posted by Off-Camber
How did this work for you? I thought about the same but the 1/2x20 lugs all showed a larger diameter where the knurling is so I wasn't sure how the 12mm logs would stay in place.
|
I honestly didn't even think to check the diameter, but I didn't have any issues. Knocked the old ones out, and ran the new ones in. I do have stud installer which seems to help keep the stud in place when driving it, but they seemed sug enough that I don't think it's needed.
Quote:
Originally Posted by Off-Camber
Agreed with too many steps. They did change to 1 wing nut. I decided to use 1x 6 socket Weatherpak plug. Once the camera mount gets remedied I'll wire it up so I can unplug 1 plug in and everything is ready to pull apart.
|
Good to hear they updated it. And great idea on the plug. Let me know how it goes once they get your mounting situation figured out. I probably will be taking the loom apart and doing something similar.
