Quote:
Originally Posted by Sky
I'm stumped on what is holding the trays on both sides of my 19 TRD ORP wheel well plastic. I'm referring to the shallow trays right on top. 1-1/2" deep about 12" long.
I can unsnap the side toward the windows, but cannot get the other side loose.
I'm wanting to see how much room is under there to mount a couple of Blue Sea cig outlets for the ARB and dog box fans etc.
Anyone remove them without damage?
Yeah - I searched and found nothing but I may have missed it.
|
The post above is correct about the two screws on the inside wall of the tray. Go into my Album Page,
I wrote this whole mod up including the added plugs and fuse block in the fender well.
A flexible screwdriver attachment makes this job a lot easier and will save your hands.
I also show how to remove the existing OEM outlets.
