|
Member
|
|
Join Date: Jul 2016
Location: USA
Posts: 223
|
|
Member
Join Date: Jul 2016
Location: USA
Posts: 223
|
Few years ago I installed the TRD skid plate and there was no instructions to remove the bars. Like the previous two posters I recently added the RCI front skid and that had no instructions to remove the bars either.
My only thought is why didn’t RCI use the same bolt holes under the radiator that the TRD skid used that also mounts the front of the bars? Would of saved me a lot of time cleaning out the threads of the holes next to them that were caked with mud. The originally used holes are much stronger location with larger bolts.
__________________
2016 TEP, Elka 2.5 RR Adj F&R, Chaos UCA & LCA, OME 899, KO2 285/70E, Wheeler F&R Bumps, BMC, Spindle Gussets, Cam Tabs, Nitro 4.88 Gearing, Tranny Cooler, Hefty Fab F&R Bumpers Dual w/ ladder, Warn Plat 12s, Icon Pan & Billet Rear Links, OCD Links, GFC RTT, RCI Sliders, Every RCI Skid Plate (In Alum if avail), SCS Stealth 6 Rims, ARB Twin Comp, ARB 2500 Awn, Quick Pitch Shower Awn, Compustar T11 & RMS, Dual 42" drawers W/ Adj sleep/dog height platform (2nd Row Removed) Switch Pros, Baja LP9's, Squadron & S2 Pros, Rock Lights, Dometic CFX3 35qt.
Last edited by JPOVS; 03-26-2021 at 04:31 AM.
|