Second quote received: $2500 for install. They could start now. They have never installed a Whipple system. Seems like I am paying these guys an extra grand for on the job learning.
I ordered a Radium Fuel Surge tank (20-0011-00) in order to allow me to drive in the mountains with boost and not be concerned with lean out due to air being sucked into the fuel system. The URD kits Deatschwerks (DW) 9-201-0766 is physically similar to the Radium Walbro GSS342 pump in that the intake is in line with the output. The fuel sock at the end of the DW pump may have to be modified to change the orientation but I will figure that out when I get the Surge tank. The Surge tank is approximately 5x5x10. I think I can squeeze it in front of the gas tank. My plan is to splice into the rubber lines that run on top of the gas tank rather that try to tie into the hard lines that run along the frame. I will have to fab a bracket to mount the surge tank to the frame.
Next is Amazon shopping for the fittings I need. My best guess is the hose on top of the gas tank is 5/16 so a barb to AN6 is on the shopping list. There also appears to be kits with hose and fittings that will work
__________________
2016 TEP, KDSS, ALPRO Apex Sliders, Focal IS690TOY, Old Red's Accessory Meter Display Mod
, Rear Differential Breather Mod, Radium Fuel Surge Tank, URD Supercharger
, Ironman FCP shocks