Quote:
Originally Posted by ZSW99
No I didn’t mess with the latch mechanism, just the ring that it clamps too that sits right above the bumper. Mine had a decent groove worn into it. That ring just attaches with two bolts so you may be able to just replace it easily if you find a less worn one. The piece that the ring attaches to is just a thin metal plate so you could try gently bending it down some too, that would probably help tighten things up
|
Ahhh, thanks for the clarification. On my 4th gen, I was able to flip this ring around 180deg but not so on the 3rd gen. So, I'll do as you did, build it up with some tiny amount of welding then sand it smooth.