|
Member
|
|
Join Date: Jan 2012
Location: Vancouver BC, Canada
Posts: 594
|
|
|
Member
Join Date: Jan 2012
Location: Vancouver BC, Canada
Posts: 594
|
My original plan was to ground to a bolt inside the steering wheel to prevent having to run another wire through the clockspring. But after testing the bolts for a good ground, none was giving me continuity. So I had to find another blank slot in the connector and the corresponding pin on the other side. the very top right pin in the steering wheel corresponds to the very top left pin on the backside as per the pic.
__________________
2015 Magnetic Gray SR5P
Last edited by emmantik; 11-19-2023 at 11:54 PM.
|
