[Iron duke]

Originally Posted by cblock406

Probably because this is the "aftermarket" wheel thread.

Hey now, these babies are custom lol. I do think they should be on here though because it's a cheap alternative and you can make them look like whatever you want.

[soulless3G4R]

How bout some vintage? 15x8 Turbines dipped black with 2" adapters to clear the calipers and with 31x10.50 15s

[Twan]

Originally Posted by Iron duke

Hey now, these babies are custom lol. I do think they should be on here though because it's a cheap alternative and you can make them look like whatever you want.

Still doesn't make them aftermarket wheels.

[Smoke_801]

Is there a list of wheel manufactures that fit our 3rd Gens? I’ve searched and this is the only thread I could find with the pretty good specs on wheels...

One thing I’m seeing is the lack of offset mention with the wheel/tire specs.

I like the deep dish look and have seen some -18 offset which might be more than I am looking for but some where between -10 to -15 offset.

If you run that kind of offset on 17” wheel will those work with the TBU? I may do that In the future and don’t want to have to buy new wheels when that time comes.

Thanks in advance!

[Formidable]

SCS BR6
Stealth blue finish

17x9” offset -38

BFG MT KM3
285/70/17

[Joelzy]

i'll toss another up for the retros.
found the wheels in Idaho for 40 bucks and crusty as can be but they cleaned up nice as hell if you like the old school look.



American Racing AR26
Hankook dynapros 295/75/16
3D printed centercaps, TBD if they hold up

[fortysixandtwo]

Originally Posted by Joelzy

i'll toss another up for the retros.
found the wheels in Idaho for 40 bucks and crusty as can be but they cleaned up nice as hell if you like the old school look.



American Racing AR26
Hankook dynapros 295/75/16
3D printed centercaps, TBD if they hold up

Funny, I had a set of those wheels 15+ years ago and hated them. Now I look at them and think they actually look pretty damn good.

[MLHooker47]

1C54F0CE-17E8-47B1-A590-FAF4B266767D_1_201_a by Austin Scott, on Flickr

[Vansnxtweek]

Originally Posted by Formidable

SCS BR6
Stealth blue finish

17x9” offset -38

BFG MT KM3
285/70/17

Solid man, and the blue is so rare!!! Love it. I'm looking at these right now as we speak and by the time you answer they prob. will be sold out...but...

Do they rub at all?

I had a 3" Toytec previously and I had Ray10s but they were just 16x8s with -12mm offset. No rubbing whatsoever. Wondering about that -38mm.

Thanks!

[Formidable]

They are always sold out! Got this set used! 😂

Minor rub full clock reverse. About to install solomotorsports LCA’s and 1.5” body lift. If these clear, will move up to 305’s for next tires. Will post results.

Originally Posted by Vansnxtweek

Solid man, and the blue is so rare!!! Love it. I'm looking at these right now as we speak and by the time you answer they prob. will be sold out...but...

Do they rub at all?

I had a 3" Toytec previously and I had Ray10s but they were just 16x8s with -12mm offset. No rubbing whatsoever. Wondering about that -38mm.

Thanks!

[Vansnxtweek]

Thanks man, post pictures for sure!!!

[Twan]

Black Rhino Boxer 17x8.5 -12 offset 4.27 backspacing and clears the 231 TBU no problem

[Vette468]

Cheap Craigslist Deal here .. Dick Cepek DC2s 16x8 -12 offset" with 285 75 16 Ironman Muds ...bought new tires and found the Numbers" # on the back of the rims.. Rims are 20 yrs old but still available, unbelievably..as i have a chipped bead on one.. ..on a 3" inch Rough Cuntry' Lift .. Lotta trimmin up Front ..itll rub if your tryin..

[Devbot]

Originally Posted by Vette468

Cheap Craigslist Deal here .. Dick Cepek DC2s 16x8 -12 offset" with 285 75 16 Ironman Muds ...bought new tires and found the Numbers" # on the back of the rims.. Rims are 20 yrs old but still available, unbelievably..as i have a chipped bead on one.. ..on a 3" inch Rough Cuntry' Lift .. Lotta trimmin up Front ..itll rub if your tryin..

Believe those are the same specs as my wheels and similarly had to do a bit of trimming and hammering. For what it's worth a buddy of mine who also had the same specs told me a while back to get some aftermarket UCAs to help caster the wheels out some more, since you lose a bit of adjustability when you lift with OEM control arms. Currently waiting for a good day to install some JBAs to test this out and confirm.

[Twan]

Originally Posted by Devbot

Believe those are the same specs as my wheels and similarly had to do a bit of trimming and hammering. For what it's worth a buddy of mine who also had the same specs told me a while back to get some aftermarket UCAs to help caster the wheels out some more, since you lose a bit of adjustability when you lift with OEM control arms. Currently waiting for a good day to install some JBAs to test this out and confirm.

Those are near identical specs to what I just posted above. With my SPC UCAs I have zero rubbing. I don't recall what setting they're on, but positive castor was added when it was aligned.