I am sorta a wits end on this. I can't get into programming mode for adding the fob remote. I have tried the dril 20 to 30 times. I looked at another thread but cannot get this work. I can't get to the part where I push the buttons on the remote.
I have 99 limited and wireless is standard on these. It has theaf deterent system sticker on the window, I don't know if that is standard or could cause a problem with this.
The door lock is sluggish will not cycle 5 times, but I used the push pull tip in tread below, but still no joy. I wound if it is too sluggish for this??
using these instructions:
1999 Toyota 4Runner
Here is thread I looked at but it is very long and goes on tangents
Programming Instructions for keyless entry remote?
In summary: the dril is: door open -key in/out- 5 cycles - door close-open - 5 cycle - key on/off 2 times
But it will not provide the two cycles that confirm that it has entered programing mode.
I also tried the key on/off 1 time and 5 times as mentioned in the tread
Can anyone please help. Please save me from having to go to the stealership.