Quote:
Originally Posted by roger123
My 98 needs a oxy sensor and I was told bank 1 sensor 1...went to the aftermarket supplier and he had only one listing from delphi #es20072....I got the impression he did not know what he was doing...left me unsure ..I have the sensor ,but can anyone tell me before I install if the frt and rear sensor are the same? I also picked up high temp permatex (copper) sealant... the kit does have a gasket..Is it necessary to use the sealant?
|
Go
here to find your Denso part number. Then go on Amazon, or just Google the part number, to find the best price. Denso's come with a gasket, no sealant needed, but I recommend copper anti-seize on the threads. If you live in the salt zone, you will need new nuts (90179-08059 at the stealer or any M8-1.25 nut you can find.
__________________
'99 4Runner SR5 5spd 3.4L V6 4WD(U.S), original '99 Talls in front, OME 906s in back, Hella fogs, Trekmaster shocks in front, Billy in back, no running boards, FIAMM horns, Alpine sound, Michelin LTX M/S2's, owned since new.
'97 HiLux SW4 5spd 4WD(Japan model bought in Brazil assembled in Argentina, very close to a 3.0 4Runner/Surf)
'71 FordWillys Jeep CJ5 (with straight six Ford Maverick 3.0 liter engine--lives in the mountains north of Sao Paulo Brazil)
My Backyard Frame Swap
reply
Linear Mode
