Quote:
Originally Posted by 1998Yota4Runner
1998 4Runner Limited 4WD v6.
So yesterday I replaced the front discs and rotors due to warping and warn brakes. And it wasn't too difficult, just a first timer at this.
Cleaned & bled, ect.
Now it seems my wheel is pulling to the right (passenger side) when applying the brakes somewhat heavily, and doesn't occur when lightly applying (to my knowledge)
And also now I hear a thump from underneath the car when reaching the bottom of the brakes and coming to a stop.
I read somewhere that the sway bar could possibly be an issue, as my driver side mount has rusted and busted recently.
So my questions are:
Why the pulling?
Why the thump?
Is the broken sway bar mount a factor?
How to fix?
If you need pictures just ask, as I'm sure someone will.
Thanks in advance - I'm somewhat a newbie, so go easy on me.
|
Check those calipers. My bad caliper had messed up dust seals on the pistons and my inside pad on the passenger side was cracked right in the middle. If you have a broken sway bar link, that should be very obvious.