[Lamer]

Originally Posted by papabeach

Finally replaced broken Fob...nice upgrade. Thanks to @infamousRNR for the recent post that these were available.

is the key fob standard issue for the highlander? or did I just miss it in your write up? I wasn't aware of any remote options.

[papabeach]

Originally Posted by Lamer

is the key fob standard issue for the highlander? or did I just miss it in your write up? I wasn't aware of any remote options.

Totally aftermarket. You can buy here:

https://www.ajtdesign-llc.com/online...nner-p90967601

[Lamer]

Originally Posted by papabeach

Totally aftermarket. You can buy here:

https://www.ajtdesign-llc.com/online...nner-p90967601

haha I know the fob case is aftermarket, i mean the system that the key fob functions: (lock/unlock/rear window up-down) is that an aftermarket system you installed or was that standard on the highlander model?

I dont have a key fob for my 4runner. but I would like one.

[papabeach]

Originally Posted by Lamer

haha I know the fob case is aftermarket, i mean the system that the key fob functions: (lock/unlock/rear window up-down) is that an aftermarket system you installed or was that standard on the highlander model?

I dont have a key fob for my 4runner. but I would like one.

Apologies, I obviously misunderstood. I think this function came on multiple models...is it possible your 4Runner has the capability and you are just missing the remote?

[Lamer]

Originally Posted by papabeach

Apologies, I obviously misunderstood. I think this function came on multiple models...is it possible your 4Runner has the capability and you are just missing the remote?

ha no worries. and highly doubt i have the capability. would be interesting if I could install it though...might be up late tonight researching that. thanks

[papabeach]

Originally Posted by Lamer

ha no worries. and highly doubt i have the capability. would be interesting if I could install it though...might be up late tonight researching that. thanks

Good luck and if you find out you have the capability and only need to buy and a program a new fob, please post your solution and/or lack there of I suppose if it doesn’t work out...sure there are other curious folks out there. Sorry I couldn’t be more helpful.

[papabeach]

I have no excuse for not doing this when I had my front end completely apart. Doh... Well anyway, I put them on the rear of the arms as recommended by Wheeler's. I hope I got the screws torqued enough...can't get much leverage in there.

Anybody ever have theirs come loose or fall off? Any suggestions?

[papabeach]

Got the rainy day blues....so after I installed some new bump stops I bought a smaller supercharger pulley!!!! URD 2.1 here we go. Figured I kinda had to do it since I need to change my drive belts...I mean...I should change my S/C pulley when I change the belts right?!? Reasonable logic...right???

PFA

[Bijan]

Originally Posted by papabeach

Got the rainy day blues....so after I installed some new bump stops I bought a smaller supercharger pulley!!!! URD 2.1 here we go. Figured I kinda had to do it since I need to change my drive belts...I mean...I should change my S/C pulley when I change the belts right?!? Reasonable logic...right???

PFA

well? low altitude results please?

[papabeach]

Originally Posted by Bijan

well? low altitude results please?

Ah...you got me, totally haven’t installed yet...between a week long trip to San Diego the back log of work that built up while I was gone and family in town I haven’t installed yet. Ok mainly just hasn’t been a priority aide from all my excuses... With that said I am about 10 hrs into the most aggressive exterior detail...wash, clay, wash, compound, polish, re-polish and soon to wax...has turned out great so far but not for the faint at heart...all by hand, Meguiars products, will post some pics when done...hopefully pulley goes on next week.

[papabeach]

Exterior detail complete
-wash, compound x2, polish x2-3, liquid wax (all Meguiar’s products). Probably at least 10hr of work all by hand. Cell phone pics don’t do it justice. Very pleased! Didn’t put anything on the trim yet...undecided at this point.

[papabeach]

Just finished rewriting my trailer harness...had a bad module that need replaced, finished putting together my new trailer and landed this 42” pig of a Snook and a nice speckled trout! Hobbies collide...not enough time in the day!

[Road Bull]

Holy jebus that's a big fish! Well done. The 4runner is still looking great. I am always impressed by how clean some of you guys get your 4runners. I know black is not easy to keep clean. Heck, I have a millennium silver, and a day or two in my neck of the woods combines just enough rain, with just enough pollen and road grime, and voilà dirty... lol. I really dig the way the front of your vehicle looks with the Shrockworks bumper and the satoshi grill. They compliment each other well.

[papabeach]

Originally Posted by Road Bull

Holy jebus that's a big fish! Well done. The 4runner is still looking great. I am always impressed by how clean some of you guys get your 4runners. I know black is not easy to keep clean. Heck, I have a millennium silver, and a day or two in my neck of the woods combines just enough rain, with just enough pollen and road grime, and voilà dirty... lol. I really dig the way the front of your vehicle looks with the Shrockworks bumper and the satoshi grill. They compliment each other well.

Thanks for the kind words...because of the salt and sand around here my 4runner gets a bath frequently. My satoshi-ish, billet insert, Line-X, Frankenstein grill was my attempt to do something a little different. I am pleased with how it all turned out.

[papabeach]

Not much work on the truck lately...more fishing 🎣 than anything but I finally got around to replacing my dead FOB battery (CR2016) and added some vinyl letters in the recessed letters on the back. Pretty simple...it’s the small things 😀.