Quote:
Originally Posted by phattyduck
The truck should also start in neutral, so try that too.
The safety switch is on the transmission itself (on the passenger side, opposite end of the shaft that the shifter linkage bolts to). It might be slightly out of adjustment and you should be able to remove it and clean up the insides if that is what is wrong.
-Charlie
|
Thank you for all the info! so i brought the piece with me to work and was able to get it all cleaned up. it was covered in grime, when i removed the PIN holding everything together i noticed one of the copper contacts was out of its groove.
after cleaning i used my Multimeter and it appears to be in working order now. I am going to put it back in when i get home and try it out
thank you for all the info!!!