Quote:
Originally Posted by NissanTechJake
If your scanner shows live data, post your STFT, LTFT, or ALPHA readings here when the engine is warm. Don’t sit here and throw parts at it if your corrections are perfect you need to look elsewhere.
DO NOT put WS in your transmission. The Toyota fluid you need is: 00279-000T4 it’s backward compatible to DEX II and III. You will also notice MOST Toyota specialty online shops recommend it as wellZ
Let me know if you can do that.
|
No worries I was leaning towards MaxLife...but I am weary about using a non-OEM ATF. Thank's for the part number, I'll look it up.
STFT, LTFT, or ALPHA. Okay will I need to load a custom PID into Torque for these?
Wait... Short and long Term Fuel Trim right? I just figured that out AS I was typing..haha!
I'll make a note to check after driving to the office tomorrow.
What is Alpha? I do not recall seeing that one.
Quote:
Originally Posted by hamsandwiches
You could just be feeling the effects of the gas gauge being wildly inaccurate which is common on 3rd gens. Do you have a live data/bluetooth OBD readout? To get the true fuel level
|
I do have a Bluetooth adapter and torque pro. I've actually always wanted to try to pull a live read of the fuel tank but it only shows "estimated" which is always WILDLY inaccurate.
Quote:
Originally Posted by BoomerBob
If you suspect the cats; this might be a plan B to the Cataclean product.
YouTube
|
I guess I will go that route if we figure out that I need to.
Also, general update. I reached half a tank at 100 miles, no idea if that is good or not. Going to fill her up tomorrow and see if she really is slurping gas-o-hal or if the gauge is just bonkers.