User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-03-2019, 05:57 PM #1
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
1998 sr5 frame swap + possible maintenance/build thread

So I’ve been lurking on this forum for quite some time but joined early in 2019. I purchased this 1998 Toyota 4Runner sr5 with 123k miles from copart sight unseen. Damage description was “minor dents and scratches”. I figured it was something to do with rust considering that it was in Delaware. Either way went ahead and pulled the trigger on this and got a great deal IMO. Very well maintained by one owner according to CarFax report.


Sure enough the driver side rear lower control arm was rusted off.


Other than that the rest of the frame was in decent shape, considering the truck was in Delaware it’s whole life. I wanted to patch the rust but after some thinking I decided that a frame swap would be a better option for me. I started looking for a clean frame and found one for a great deal in TN with no rust at all.



After some reading on this forum I decided to go the Eastwood rust prevention on the inside of the frame and POR-15 on the exterior.








Sent from my iPhone using Tapatalk

Last edited by Venka93; 01-03-2020 at 09:40 PM.
Venka93 is offline   Reply With QuoteReply With Quote
Old 07-04-2019, 06:32 AM #2
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
What’s some recommended maintenance that I should do while I’m in there?

So far I will be doing the valve cover gaskets, all fluids flush, polyurethane body mounts, and probably the trans cooler.


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-03-2020, 07:40 PM #3
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93’s SR5 build/maintenance thread

A little update on that frame swap


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-03-2020, 07:42 PM #4
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road



Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-04-2020, 10:06 PM #5
VernySanders's Avatar
VernySanders VernySanders is offline
Member
 
Join Date: Jan 2019
Location: Grand Rapids
Age: 28
Posts: 489
Real Name: Werner
VernySanders will become famous soon enough VernySanders will become famous soon enough
VernySanders VernySanders is offline
Member
VernySanders's Avatar
 
Join Date: Jan 2019
Location: Grand Rapids
Age: 28
Posts: 489
Real Name: Werner
VernySanders will become famous soon enough VernySanders will become famous soon enough
I would get over analytical and replace every but and bolt with stainless where possible, and all new bushings wherever needed. Especially body bushings because the frame is already off. But this is a selfish post because I'm more interested in how you located the frame?
VernySanders is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 09:47 AM #6
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Quote:
Originally Posted by VernySanders View Post
I would get over analytical and replace every but and bolt with stainless where possible, and all new bushings wherever needed. Especially body bushings because the frame is already off. But this is a selfish post because I'm more interested in how you located the frame?


It was a lot easier to find the frame than I thought it would. Craigslist. I searched cities in the south


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 03:28 PM #7
VernySanders's Avatar
VernySanders VernySanders is offline
Member
 
Join Date: Jan 2019
Location: Grand Rapids
Age: 28
Posts: 489
Real Name: Werner
VernySanders will become famous soon enough VernySanders will become famous soon enough
VernySanders VernySanders is offline
Member
VernySanders's Avatar
 
Join Date: Jan 2019
Location: Grand Rapids
Age: 28
Posts: 489
Real Name: Werner
VernySanders will become famous soon enough VernySanders will become famous soon enough
Quote:
Originally Posted by Venka93 View Post
It was a lot easier to find the frame than I thought it would. Craigslist. I searched cities in the south


Sent from my iPhone using Tapatalk
Really?! I'll do that then! Were you looking for part outs or just searching for frames?
VernySanders is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 06:03 PM #8
TheDurk's Avatar
TheDurk TheDurk is offline
Elite Member
 
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,494
TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light
TheDurk TheDurk is offline
Elite Member
TheDurk's Avatar
 
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,494
TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light
I found mine on car-part.com. There were plenty on there. I found one in good condition right here in NJ, but it was a 2001 wrecked in 2010, so half the years on the road as my old one. Shipping is brutal on these babies if you can't go get it.

Pics in my sig.
__________________
'99 4Runner SR5 5spd 3.4L V6 4WD(U.S), original '99 Talls in front, OME 906s in back, Hella fogs, Trekmaster shocks in front, Billy in back, no running boards, FIAMM horns, Alpine sound, Michelin LTX M/S2's, owned since new.
'97 HiLux SW4 5spd 4WD(Japan model bought in Brazil assembled in Argentina, very close to a 3.0 4Runner/Surf)
'71 FordWillys Jeep CJ5 (with straight six Ford Maverick 3.0 liter engine--lives in the mountains north of Sao Paulo Brazil)
My Backyard Frame Swap
TheDurk is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 06:36 PM #9
tonte101's Avatar
tonte101 tonte101 is offline
Junior Member
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
tonte101 tonte101 is offline
Junior Member
tonte101's Avatar
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
rusted rear trailing arm frame mount

Is there any hope of salvaging a frame that has rust in that area? I have a truck from Rochester, NY, but at this point there's a hole through the floor above the passenger side shock perch thing and some holes on the frame, where the rear trailing arm meets the frame. At this point I'm wondering if it's salvageable, will a welder take this on? Or should i just find another rig and swap over the 4wd driveline. PINA.... solid work
__________________
Black 97' 4runner base 4wd 2.7 - 5 speed. LCE header and 2.5" magnaflow cat.
tonte101 is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 10:38 PM #10
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Quote:
Originally Posted by VernySanders View Post
Really?! I'll do that then! Were you looking for part outs or just searching for frames?


I found this one by looking for a part out. I’m not sure of the prices out there now but I seen one on here for $1400. Which in my opinion is wayyyy too much. I paid a fraction of that.


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-06-2020, 10:41 PM #11
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Quote:
Originally Posted by tonte101 View Post
Is there any hope of salvaging a frame that has rust in that area? I have a truck from Rochester, NY, but at this point there's a hole through the floor above the passenger side shock perch thing and some holes on the frame, where the rear trailing arm meets the frame. At this point I'm wondering if it's salvageable, will a welder take this on? Or should i just find another rig and swap over the 4wd driveline. PINA.... solid work


I honestly don’t know. Seems like a lot of work. I’m sure you could get an estimate from some welder. I decided to swap my frame because I want to keep this rig for a while. Plus I’m doing it myself so it comes out a lot cheaper for me too.


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-07-2020, 01:10 PM #12
TheDurk's Avatar
TheDurk TheDurk is offline
Elite Member
 
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,494
TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light
TheDurk TheDurk is offline
Elite Member
TheDurk's Avatar
 
Join Date: Nov 2006
Location: Pocono Mountains
Posts: 7,494
TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light TheDurk is a glorious beacon of light
Quote:
Originally Posted by tonte101 View Post
Is there any hope of salvaging a frame that has rust in that area? I have a truck from Rochester, NY, but at this point there's a hole through the floor above the passenger side shock perch thing and some holes on the frame, where the rear trailing arm meets the frame. At this point I'm wondering if it's salvageable, will a welder take this on? Or should i just find another rig and swap over the 4wd driveline. PINA.... solid work
I think I speak for everyone on here that we would like to see pics before saying anything. Some are toast; some are fixable. People have done amazing things.
__________________
'99 4Runner SR5 5spd 3.4L V6 4WD(U.S), original '99 Talls in front, OME 906s in back, Hella fogs, Trekmaster shocks in front, Billy in back, no running boards, FIAMM horns, Alpine sound, Michelin LTX M/S2's, owned since new.
'97 HiLux SW4 5spd 4WD(Japan model bought in Brazil assembled in Argentina, very close to a 3.0 4Runner/Surf)
'71 FordWillys Jeep CJ5 (with straight six Ford Maverick 3.0 liter engine--lives in the mountains north of Sao Paulo Brazil)
My Backyard Frame Swap
TheDurk is offline   Reply With QuoteReply With Quote
Old 01-07-2020, 06:35 PM #13
Venka93's Avatar
Venka93 Venka93 is offline
Member
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Venka93 Venka93 is offline
Member
Venka93's Avatar
 
Join Date: Jan 2019
Location: Columbus, OH
Posts: 84
Real Name: Veniamin
Venka93 is on a distinguished road
Quote:
Originally Posted by tonte101 View Post
Is there any hope of salvaging a frame that has rust in that area? I have a truck from Rochester, NY, but at this point there's a hole through the floor above the passenger side shock perch thing and some holes on the frame, where the rear trailing arm meets the frame. At this point I'm wondering if it's salvageable, will a welder take this on? Or should i just find another rig and swap over the 4wd driveline. PINA.... solid work




Quote:
Originally Posted by TheDurk View Post
I think I speak for everyone on here that we would like to see pics before saying anything. Some are toast; some are fixable. People have done amazing things.


I second that. Your description made it sound bad but you never know.


Sent from my iPhone using Tapatalk
Venka93 is offline   Reply With QuoteReply With Quote
Old 01-08-2020, 10:31 PM #14
tonte101's Avatar
tonte101 tonte101 is offline
Junior Member
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
tonte101 tonte101 is offline
Junior Member
tonte101's Avatar
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
Right on. I'll take a couple snaps in the morning of my pitting/holes...just finished cutting off my front bumper tonight. I'll definitely prioritize rust prevention from now on haha. This truck is going on 22 years old so I have to say I am willing to put in blood, sweat, and tears as she's been doing the same for the 5 years I have owned her.
__________________
Black 97' 4runner base 4wd 2.7 - 5 speed. LCE header and 2.5" magnaflow cat.
tonte101 is offline   Reply With QuoteReply With Quote
Old 01-09-2020, 04:51 PM #15
tonte101's Avatar
tonte101 tonte101 is offline
Junior Member
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
tonte101 tonte101 is offline
Junior Member
tonte101's Avatar
 
Join Date: Feb 2017
Location: Marco Island, FL
Posts: 16
tonte101 is on a distinguished road
Quote:
Originally Posted by TheDurk View Post
People have done amazing things.
I am hoping this within the realm of fixable by an amazing act... haha.
The first is driver side, no pitting on the inside side of the lower control arm mount, but there is considerable scaling that I have painted over.
The second is passenger side, no pitting on the outside, only inside.
Third is the issue with the floor in the rear which I have layed fiberglass over top of from the inside. I regret not using chicken wire to help create the form, but this is not a final solution, just a patch for now.
Attached Images
1998 sr5 frame swap + possible maintenance/build thread-driver_small-jpg  1998 sr5 frame swap + possible maintenance/build thread-passenger_small-jpg  1998 sr5 frame swap + possible maintenance/build thread-floorrust_01_small-jpg 
__________________
Black 97' 4runner base 4wd 2.7 - 5 speed. LCE header and 2.5" magnaflow cat.

Last edited by tonte101; 01-09-2020 at 04:58 PM.
tonte101 is offline   Reply With QuoteReply With Quote
Reply

Tags
delaware , frame , miles , rust , sr5

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
White 06 V6 4X4 Build and Maintenance Thread TannerW 4th Gen T4Rs 15 01-14-2019 10:54 PM
Doc's maintenance/build thread Cow_doc.308 3rd gen T4Rs 8 09-17-2016 12:08 AM
v3's maintenance/build thread v3bahumut 3rd gen T4Rs 7 04-27-2014 12:14 PM
YoungRunner's 97 LTD Build & Maintenance Thread young-runner 3rd gen T4Rs 1 06-09-2011 01:32 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 09:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020