User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-25-2019, 02:26 PM #46
dogtail's Avatar
dogtail dogtail is offline
Member
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
dogtail dogtail is offline
Member
dogtail's Avatar
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
Quote:
Originally Posted by brillo_76 View Post
I pulled the tar covers off on the inner rocker and replaced those all with rubber body plugs and spray [ my rust prevention liquid of choice] in that way. :]

Being all my rigs PO neglected the body panels and frame. I have to replace most of my outer in inner rocker metals on my rides. In that process now with Tetanus 1.

Sent from my SM-J337V using Tapatalk
Nice tip on those little square covers, I never really noticed them. I always wondered how they would have painted the inside of the rockers, I guess thats how. I pushed on them and they feel bouncy like there's a round hole under them. So where did you buy those body plugs for exact fit? Access plugs are easier than jamming a spray tube up thru the drain holes. If I do the body plugs, I can just do a quick blast with the spray gun.
Attached Images
POR-15 or just Fluid Film-img_0963-jpg 
__________________
*1999 3.4L, 4wd/5spd, swapped motor and trans, heavy use DD, seasonal rust proofing using WD-40 only
*2000 3.4L, 4wd/5spd, parts rig, picking the carcass
dogtail is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 06:07 PM #47
brillo_76's Avatar
brillo_76 brillo_76 is offline
Elite Member
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
brillo_76 brillo_76 is offline
Elite Member
brillo_76's Avatar
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
Glad I could help out the group.. That is how i get { my fluid of choice} into the rockers..
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
brillo_76 is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 08:04 PM #48
eimkeith's Avatar
eimkeith eimkeith is offline
Official Vendor
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,471
eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light
eimkeith eimkeith is offline
Official Vendor
eimkeith's Avatar
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,471
eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light
i just stumbled across this thread, but y'all - POR 15 is awful. - count on not doing any weld repairs or modifications in the future; that stuff is really difficult to remove.

(and we all know these trucks like to be modded...)

POR 15 edges out DynaMat for the worst thing you can do to a vehicle, long term, IMO.
__________________
keith
eimkeith.com
all product descriptions © eimkeith LLC 2016-2023
eimkeith is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 08:49 PM #49
brillo_76's Avatar
brillo_76 brillo_76 is offline
Elite Member
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
brillo_76 brillo_76 is offline
Elite Member
brillo_76's Avatar
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
Quote:
Originally Posted by eimkeith View Post
i just stumbled across this thread, but y'all - POR 15 is awful. - count on not doing any weld repairs or modifications in the future; that stuff is really difficult to remove.

(and we all know these trucks like to be modded...)

POR 15 edges out DynaMat for the worst thing you can do to a vehicle, long term, IMO.
Hmm.. I removed some off my Frame with an angle grinder. I never did try to weld through it. However, challenge accepted.. Next time I use KB seal or POR-15 something. I will see how it welds through. I can tell you one thing for sure. Both those products are worthless on a mower deck.. Can not take the sandblasting of the mowing action. Will not even last a season. ;-)
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
brillo_76 is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 09:58 PM #50
thezentree's Avatar
thezentree thezentree is offline
Senior Member
 
Join Date: Mar 2017
Location: Kentucky
Posts: 1,165
Real Name: Robert');DROP TABLE Students;
thezentree is a jewel in the rough thezentree is a jewel in the rough thezentree is a jewel in the rough thezentree is a jewel in the rough
thezentree thezentree is offline
Senior Member
thezentree's Avatar
 
Join Date: Mar 2017
Location: Kentucky
Posts: 1,165
Real Name: Robert');DROP TABLE Students;
thezentree is a jewel in the rough thezentree is a jewel in the rough thezentree is a jewel in the rough thezentree is a jewel in the rough
Quote:
Originally Posted by eimkeith View Post
i just stumbled across this thread, but y'all - por 15 is awful. - count on not doing any weld repairs or modifications in the future; that stuff is really difficult to remove.

(and we all know these trucks like to be modded...)

por 15 edges out dynamat for the worst thing you can do to a vehicle, long term, imo.
COOL GOOD THING I JUST SPEND $110 ON A BUNCH OF POR-15

dammit
__________________
2001 SR5 - Like OEM, only worse (gears, e-locker, armor)
thezentree is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 10:51 PM #51
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,037
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,037
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Quote:
Originally Posted by dogtail View Post
Nice tip on those little square covers, I never really noticed them. I always wondered how they would have painted the inside of the rockers, I guess thats how. I pushed on them and they feel bouncy like there's a round hole under them. So where did you buy those body plugs for exact fit? Access plugs are easier than jamming a spray tube up thru the drain holes. If I do the body plugs, I can just do a quick blast with the spray gun.
You don't even need to do that. Rockers are accessible to spray from the screw holes in the door jamb. You don't even need to pop off the plastic trim.
T4R2014 is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 10:52 PM #52
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,037
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,037
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Quote:
Originally Posted by eimkeith View Post
i just stumbled across this thread, but y'all - POR 15 is awful. - count on not doing any weld repairs or modifications in the future; that stuff is really difficult to remove.

(and we all know these trucks like to be modded...)

POR 15 edges out DynaMat for the worst thing you can do to a vehicle, long term, IMO.
You're telling me an angle grinder won't remove it?
T4R2014 is offline   Reply With QuoteReply With Quote
Old 09-25-2019, 11:08 PM #53
eimkeith's Avatar
eimkeith eimkeith is offline
Official Vendor
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,471
eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light
eimkeith eimkeith is offline
Official Vendor
eimkeith's Avatar
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,471
eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light eimkeith is a glorious beacon of light
Quote:
Originally Posted by T4R2014 View Post
You're telling me an angle grinder won't remove it?
yeah, it'll move a lot of it, smear it around, etc. lol.
__________________
keith
eimkeith.com
all product descriptions © eimkeith LLC 2016-2023
eimkeith is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 08:33 AM #54
dogtail's Avatar
dogtail dogtail is offline
Member
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
dogtail dogtail is offline
Member
dogtail's Avatar
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
Quote:
Originally Posted by T4R2014 View Post
You don't even need to do that. Rockers are accessible to spray from the screw holes in the door jamb. You don't even need to pop off the plastic trim.
Yeah the kick plate screws are another option. So yeah we have 3 access options. I'm liking the plug hole on the backside idea though cause I can give it a quick 3 second high pressure blast with spray gun while I'm doing the rest of the rig. I think I will only need to one plug per rocker cause of the spray I have at 80 psi. It will fog out the whole interior of the rocker. Any of us doing any of these ways will not be complaining about the rockers rotting out.
__________________
*1999 3.4L, 4wd/5spd, swapped motor and trans, heavy use DD, seasonal rust proofing using WD-40 only
*2000 3.4L, 4wd/5spd, parts rig, picking the carcass
dogtail is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 09:17 AM #55
brillo_76's Avatar
brillo_76 brillo_76 is offline
Elite Member
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
brillo_76 brillo_76 is offline
Elite Member
brillo_76's Avatar
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
Quote:
Originally Posted by dogtail View Post
Yeah the kick plate screws are another option. So yeah we have 3 access options. I'm liking the plug hole on the backside idea though cause I can give it a quick 3 second high pressure blast with spray gun while I'm doing the rest of the rig. I think I will only need to one plug per rocker cause of the spray I have at 80 psi. It will fog out the whole interior of the rocker. Any of us doing any of these ways will not be complaining about the rockers rotting out.
That will work. I like to pretend I am a kid and use my fluid gun as a super soaker. Hit all the holes in the back of the inner rocker. Yes you can acess the top of the rocker and spray down through if you wish. Having to remove a couple screws to do that but that is the 2nd option.
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
brillo_76 is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 09:20 AM #56
brillo_76's Avatar
brillo_76 brillo_76 is offline
Elite Member
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
brillo_76 brillo_76 is offline
Elite Member
brillo_76's Avatar
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
Quote:
Originally Posted by thezentree View Post
COOL GOOD THING I JUST SPEND $110 ON A BUNCH OF POR-15

dammit
Use it its a good product. I have one done completely in POR-15 / KB Seal.

If you in the rust belt, its better then not having any frame left.
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
brillo_76 is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 09:35 AM #57
brillo_76's Avatar
brillo_76 brillo_76 is offline
Elite Member
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
brillo_76 brillo_76 is offline
Elite Member
brillo_76's Avatar
 
Join Date: May 2017
Location: Western PA
Posts: 6,012
Real Name: Jon
brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute brillo_76 has a reputation beyond repute
Quote:
Originally Posted by eimkeith View Post
yeah, it'll move a lot of it, smear it around, etc. lol.
There is nothing wrong with either POR-15 or KB Seal if your rig lives in the rust belt. As I would rather see folks have frames left then not. If its done properly adheres to the steel quite well. I am sure I can get it off any area if I had to weld if need be or even burn through it to do repairs.

Granted other environments, like the south and west rust isn't a major issue.
one would not have to be super concerned steel rot issues.

Everyone can do as they wish as its their Rigs. As well is everyone has entitled to their opinion on any subject matter. :-)
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
brillo_76 is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 10:11 AM #58
tvpierce's Avatar
tvpierce tvpierce is offline
Member
 
Join Date: Oct 2016
Location: Maine
Posts: 307
tvpierce will become famous soon enough
tvpierce tvpierce is offline
Member
tvpierce's Avatar
 
Join Date: Oct 2016
Location: Maine
Posts: 307
tvpierce will become famous soon enough
Quote:
Originally Posted by eimkeith View Post
yeah, it'll move a lot of it, smear it around, etc. lol.
So the criticism of POR-15 is that it sticks to metal and won't come off?

Hmm.

I'd call that a selling point!
tvpierce is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 11:03 AM #59
dogtail's Avatar
dogtail dogtail is offline
Member
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
dogtail dogtail is offline
Member
dogtail's Avatar
 
Join Date: May 2015
Location: Massachusetts
Posts: 648
Real Name: Keith
dogtail has a spectacular aura about dogtail has a spectacular aura about
Quote:
Originally Posted by brillo_76 View Post
That will work. I like to pretend I am a kid and use my fluid gun as a super soaker. Hit all the holes in the back of the inner rocker. Yes you can acess the top of the rocker and spray down through if you wish. Having to remove a couple screws to do that but that is the 2nd option.
So where can I buy those exact fit body plugs? Cause I don't want to hunt for them if I don't have to.
__________________
*1999 3.4L, 4wd/5spd, swapped motor and trans, heavy use DD, seasonal rust proofing using WD-40 only
*2000 3.4L, 4wd/5spd, parts rig, picking the carcass
dogtail is offline   Reply With QuoteReply With Quote
Old 09-26-2019, 11:37 AM #60
Ed_C's Avatar
Ed_C Ed_C is offline
Senior Member
 
Join Date: Oct 2011
Location: New Jersey
Posts: 1,836
Real Name: Ed
Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light
Ed_C Ed_C is offline
Senior Member
Ed_C's Avatar
 
Join Date: Oct 2011
Location: New Jersey
Posts: 1,836
Real Name: Ed
Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light Ed_C is a glorious beacon of light
I might pick up this half-gallon mini sprayer from Harbor Freight, at $4.99 what's there to lose. I bought WD in gallon containers so I'll need a small sprayer. 0.5 gallon Home and Garden Sprayer. They also have larger (with wand) sprayers for $13.99 (1.25 gal) and $14.99 (2 gal)

Also, Pep Boys has a 20% off online deal at the moment, $15.99 for 1-gallon WD40. Even at their $19.99 regular price it's cheaper than buying from Harbor Freight ($24.99) or Home Depot ($21.97). You need to order online then select for store pickup.

Last edited by Ed_C; 09-26-2019 at 11:51 AM.
Ed_C is offline   Reply With QuoteReply With Quote
Reply

Tags
film , fluid , frame , por-15 , rust

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The end-all Fluid Film thread IL_Fletch Maintenance/Detailing 26 01-01-2024 06:01 PM
Fluid Film Applicator Last Man Standing 3rd gen T4Rs 3 08-13-2019 10:37 PM
Fluid film my frame? Bbanks97 3rd gen T4Rs 24 01-07-2019 03:07 PM
Fluid film prep ? jminz 4th Gen T4Rs 4 04-05-2018 03:12 PM
Fluid Film PSA A10GAC General Discussions 1 08-27-2016 01:25 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 10:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020