Quote:
Originally Posted by Haybale
Doing the rear diff breather mod and rear bearings and seals this weekend
|
Haybale,
The mod for the breather took me about an hour or so. I found that the point where the fuel line goes under the filler tube is a point you will need to add a layer of extra tubing around the fuel line for the vent so the abrasion doesn't wear it down. If you reviewed Tim's video you will know what I am talking about, if not let me know and I will take a picture of what I did.
Also, keep track of time involved and any thoughts you have on this repair of the axle seals and bearings.
LMS