|
Senior Member
|
|
Join Date: Mar 2016
Location: West Bend, WI
Posts: 2,339
Real Name: Mike
|
|
Senior Member
Join Date: Mar 2016
Location: West Bend, WI
Posts: 2,339
Real Name: Mike
|
You'll need to swap out the engine wiring harness from your old bad motor to the donor motor. Everything on the engine side will plug in without any modifications. I was a similar situation, I had a bad 97 engine and swapped in an engine from a 99. The problem was the connectors on the ECM side were all different and the solution was to just reuse the original wiring harness. You'll need to remove the intake manifold to get the injector wires off but it's pretty easy. I want to say it only took me an hour or so to swap the harness over.
EDIT: sorry, i missed the part where you said you cut the original wiring harness. You'll need a wiring harness from a 97 w/4wd. You should be able to find one at a junk yard.
Good luck!
__________________
1997 SR5 4x4 Auto, 99' tall coils up front, OME 906's, Truetrac LSD, Airaid MIT
1999 SR5 4x4 Auto for parts
2011 Camry SE V6
2011 Highlander Limited
Last edited by thegipper; 10-10-2019 at 08:40 AM.
|