User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-17-2020, 10:31 AM #31
Tommy854runner Tommy854runner is offline
Member
 
Join Date: Jan 2020
Location: roswell
Posts: 31
Tommy854runner is on a distinguished road
Tommy854runner Tommy854runner is offline
Member
 
Join Date: Jan 2020
Location: roswell
Posts: 31
Tommy854runner is on a distinguished road
What rear spring would be best for about 2-2.5" lift but a soft ride? It won't be off road very much so looking for best ride quality possible. Probably going to run either a 265-75-16 or 285-70-16.
Tommy854runner is offline   Reply With QuoteReply With Quote
Old 01-24-2020, 05:23 PM #32
2wheelnut 2wheelnut is offline
Junior Member
 
Join Date: Jan 2020
Location: American Canyon
Posts: 1
2wheelnut is on a distinguished road
2wheelnut 2wheelnut is offline
Junior Member
 
Join Date: Jan 2020
Location: American Canyon
Posts: 1
2wheelnut is on a distinguished road
Quote:
Originally Posted by Tommy854runner View Post
What rear spring would be best for about 2-2.5" lift but a soft ride? It won't be off road very much so looking for best ride quality possible. Probably going to run either a 265-75-16 or 285-70-16.
I'm in the same boat, so far as I've read up on OME 906's would do it but a little harsh, OME 890s would be good unless you need full droop then they may fall out.

I'm also debating the fronts.

Bought the rig with mish mash of parts. 5100's up front and OME 895s with OME shocks in the rear. Rides like garbage.
2wheelnut is offline   Reply With QuoteReply With Quote
Old 01-24-2020, 08:31 PM #33
Dieselchessy Dieselchessy is offline
Member
 
Join Date: Dec 2019
Location: SW Washington
Posts: 462
Dieselchessy has a spectacular aura about Dieselchessy has a spectacular aura about
Dieselchessy Dieselchessy is offline
Member
 
Join Date: Dec 2019
Location: SW Washington
Posts: 462
Dieselchessy has a spectacular aura about Dieselchessy has a spectacular aura about
I started to make a spread sheet with all the rear spring options and then decided I was going 890's and I'd change if I don't like it.

890 seems about the best choice for 2.5-3" lift when not carrying lots of weight. Amongst the other 2.5-3" options they seem less likely to fall out.

model/spring rate/wire diameter/free height D/P

OME 2890 190 .591 17.13/16.73
OME 2891 210 0.63 16.53/16.14
OME 2906 220 .669 15.35/14.96

I bought Tundra TRD coils for the front.
__________________
Owned 82, 83, 87 pickup, 98, 99 SR5 4runner
Currently own a 98 SR5, 5spd, 4x4, e-locker, no sunroof. 2012 LTD with the normal options.
Dieselchessy is offline   Reply With QuoteReply With Quote
Old 01-26-2020, 12:00 PM #34
4Runner4Leon's Avatar
4Runner4Leon 4Runner4Leon is offline
Senior Member
 
Join Date: Nov 2017
Location: Palos Verdes, CA
Posts: 1,797
Real Name: Leon
4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice
4Runner4Leon 4Runner4Leon is offline
Senior Member
4Runner4Leon's Avatar
 
Join Date: Nov 2017
Location: Palos Verdes, CA
Posts: 1,797
Real Name: Leon
4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice
Quote:
Originally Posted by Dieselchessy View Post
I started to make a spread sheet with all the rear spring options and then decided I was going 890's and I'd change if I don't like it.

890 seems about the best choice for 2.5-3" lift when not carrying lots of weight. Amongst the other 2.5-3" options they seem less likely to fall out.

model/spring rate/wire diameter/free height D/P

OME 2890 190 .591 17.13/16.73
OME 2891 210 0.63 16.53/16.14
OME 2906 220 .669 15.35/14.96

I bought Tundra TRD coils for the front.
One thing to note with the numbers above is that these springs won't give the same amount of lift. Using these numbers (which I haven't verified, but assume to be correct), here are the spring heights with 1000 lbs of load:

rate free H H @1000lb
890 190 17.13 11.87
891 210 16.53 11.77
906 220 15.35 10.80

Note that 890 and 891 have about 1" more lift than 906.

I have about a 2" lift with the 906's in my '97 (which is exactly what I wanted), so you'll get closer to 3" lift with the 890/891.

I'm quite happy with the ride with the 906's, I don't find them too stiff at all (and I like comfort, so take that for what it's worth).
__________________
'97 4Runner Limited 4WD E-Locker ~200k
Falken Wildpeak 265/75/16 A/T3W | Pro Comp 69 16x8 | OME 2906 Springs | B&M 70264 Trans Cooler | GlowShift Trans Temp Gauge | OEDRO LED Bulbs
Spiker Engineering High-Lift Hood Struts and Ultragauge/Scangauge Mounts


Last edited by 4Runner4Leon; 01-26-2020 at 03:30 PM.
4Runner4Leon is offline   Reply With QuoteReply With Quote
Old 01-26-2020, 01:32 PM #35
Dieselchessy Dieselchessy is offline
Member
 
Join Date: Dec 2019
Location: SW Washington
Posts: 462
Dieselchessy has a spectacular aura about Dieselchessy has a spectacular aura about
Dieselchessy Dieselchessy is offline
Member
 
Join Date: Dec 2019
Location: SW Washington
Posts: 462
Dieselchessy has a spectacular aura about Dieselchessy has a spectacular aura about
That height at 1000# would be good data to have. Would be nice if all this type data was readily available.
__________________
Owned 82, 83, 87 pickup, 98, 99 SR5 4runner
Currently own a 98 SR5, 5spd, 4x4, e-locker, no sunroof. 2012 LTD with the normal options.
Dieselchessy is offline   Reply With QuoteReply With Quote
Old 01-26-2020, 03:31 PM #36
4Runner4Leon's Avatar
4Runner4Leon 4Runner4Leon is offline
Senior Member
 
Join Date: Nov 2017
Location: Palos Verdes, CA
Posts: 1,797
Real Name: Leon
4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice
4Runner4Leon 4Runner4Leon is offline
Senior Member
4Runner4Leon's Avatar
 
Join Date: Nov 2017
Location: Palos Verdes, CA
Posts: 1,797
Real Name: Leon
4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice 4Runner4Leon is just really nice
Quote:
Originally Posted by Dieselchessy View Post
That height at 1000# would be good data to have. Would be nice if all this type data was readily available.
Agreed. It's easy to calculate the expected ride height given the free height and spring rate, but it wouldn't account for progressive springs.
__________________
'97 4Runner Limited 4WD E-Locker ~200k
Falken Wildpeak 265/75/16 A/T3W | Pro Comp 69 16x8 | OME 2906 Springs | B&M 70264 Trans Cooler | GlowShift Trans Temp Gauge | OEDRO LED Bulbs
Spiker Engineering High-Lift Hood Struts and Ultragauge/Scangauge Mounts


Last edited by 4Runner4Leon; 01-26-2020 at 08:41 PM.
4Runner4Leon is offline   Reply With QuoteReply With Quote
Old 01-27-2020, 12:39 AM #37
4runnerfiend's Avatar
4runnerfiend 4runnerfiend is offline
Member
 
Join Date: Oct 2018
Location: San Diego CA
Posts: 308
4runnerfiend will become famous soon enough 4runnerfiend will become famous soon enough
4runnerfiend 4runnerfiend is offline
Member
4runnerfiend's Avatar
 
Join Date: Oct 2018
Location: San Diego CA
Posts: 308
4runnerfiend will become famous soon enough 4runnerfiend will become famous soon enough
Quote:
Originally Posted by Tommy854runner View Post
What rear spring would be best for about 2-2.5" lift but a soft ride? It won't be off road very much so looking for best ride quality possible. Probably going to run either a 265-75-16 or 285-70-16.
If your rig will not see offroad and will not have tons of weight in the rear then the best ride quality will be oem springs. So... a spacer lift will be your best bet. Daystar makes a 2.5" and a 1.5" spacer for the rear.
Amazon.com: Daystar, Toyota 4Runner 2.5" Rear Lift Kit, fits 1996 to 2002 2/4WD, all transmissions, all cabs KT09108BK, Made in America: Automotive
Amazon.com: Daystar, Toyota 4Runner 1.5" Rear Lift Kit, fits 1996 to 2002 2/4WD, all transmissions, all cabs KT09107BK, Made in America, Black: Automotive
__________________
1999 SR5: ELocker Retrofit, 99 talls-tundra Billy/LC 8 wraps-FJ Billys, Rokmen lower links, rear swaybar delete, Savage skids, TruckShopSD Sliders, Eimkeith PHC, ARB diff breather, F/R DuroBumps, 285 BFG KO2, Doug Thorley Headers
4runnerfiend is offline   Reply With QuoteReply With Quote
Old 01-27-2020, 10:34 AM #38
fourfive's Avatar
fourfive fourfive is offline
Senior Member
 
Join Date: Nov 2014
Location: Marietta, Georgia
Posts: 1,330
fourfive will become famous soon enough fourfive will become famous soon enough
fourfive fourfive is offline
Senior Member
fourfive's Avatar
 
Join Date: Nov 2014
Location: Marietta, Georgia
Posts: 1,330
fourfive will become famous soon enough fourfive will become famous soon enough
Quote:
Originally Posted by Dieselchessy View Post
I started to make a spread sheet with all the rear spring options and then decided I was going 890's and I'd change if I don't like it.

890 seems about the best choice for 2.5-3" lift when not carrying lots of weight. Amongst the other 2.5-3" options they seem less likely to fall out.

model/spring rate/wire diameter/free height D/P

OME 2890 190 .591 17.13/16.73
OME 2891 210 0.63 16.53/16.14
OME 2906 220 .669 15.35/14.96

I bought Tundra TRD coils for the front.
2.5-3.0" lift sounds about right when I had my 890s. I try to use center hub to fender measurements so that it's easier to establish a baseline for lift. With 890s I was consistently at 22.5-22.75" center hub to fender with a couple hundred pounds of cargo gear. With my Toytec superflex (the ones advertised for 3.75" lift) I sit 23-23.25" with the same amount of cargo weight. They handled similarly & was happy with both. I don't think the coil falling out should be an issue if a proper length shock is used.

For my next front set up I'm considering the Tundra TRD/Tundra bilsteins or Tundra 6112.
__________________
•Black 2002 SR5 4x4 3.4L V6
Suspension: Front: Toytec Boss coilovers/eibach 600#, SPC UCA, durobumps Rear: Bilstein/Superflex, SS adjustable panhard, durobumps Body Lift: 2" 4crawler Tires: 315/75/16 General Grabber AT2 Wheels: SCS F5 Matte black 16x8 3.5bs Armor: Custom bolt on rock sliders (no frame drilling)
•Black 2018 TRD Pro (wife’s)
Armor: Custom bolt on rock sliders (U-bolts)
fourfive is offline   Reply With QuoteReply With Quote
Old 01-27-2020, 12:06 PM #39
HiMiles HiMiles is offline
Member
 
Join Date: Jan 2018
Location: Emeryville, CA
Posts: 48
HiMiles is on a distinguished road
HiMiles HiMiles is offline
Member
 
Join Date: Jan 2018
Location: Emeryville, CA
Posts: 48
HiMiles is on a distinguished road
Quote:
Originally Posted by CT135 View Post
So with your bumper/swing out. Roughly how much lift are you getting from the super flex? Hub to fender would be awesome to know.
Here's a picture. This is with Superflex + trimmed OEM top cones. The rear bumper is a 4XI with a swing-out 34" tire and a full jerry can, so fairly heavy.

Hub-to-fender distance is 23.75". Even with the bumper setup, I imagine I'm still short of the 1000lb total load on each spring.

HiMiles is offline   Reply With QuoteReply With Quote
Old 03-07-2020, 11:18 AM #40
owyheerat's Avatar
owyheerat owyheerat is offline
Member
 
Join Date: Nov 2013
Location: Nampa Idaho
Posts: 341
Real Name: Durwin
owyheerat is on a distinguished road
owyheerat owyheerat is offline
Member
owyheerat's Avatar
 
Join Date: Nov 2013
Location: Nampa Idaho
Posts: 341
Real Name: Durwin
owyheerat is on a distinguished road
Quote:
Originally Posted by rickashay View Post
Good discussion. I might have to try the superflex's but I am worried I will be too heavy for them too...

I am just waiting for someone to try the Dobinsons 675V before I make a move.... any takers? lol
Addison,

I'm late to this discussion. I am very interested in this topic though. I currently am running 861's w/ Tokico LC shocks. I love the flex, but wish the ride height was a little lower. Also, they are too stiff.
For reference, I have a Bandit design rear bumper with dual swing outs (which is heavy) and 35" spare, rear storage / sleeping platform, fridge, Rago rear window panels (full) and usually my 70lb golden retriever. So I'm guessing 400+lbs. And the 861's are still too stiff.

Have you made a decision yet?

Is Dobinson the solution?

Thanks

Durwin
__________________
99 2.7l 5spd ARB locked F & R, 5.29's, dual cases, Shrockworks front bumper w/ Warn M8000s, King 25001-151EXT coilovers, OME 861/LC shocks, Stubb's sliders, Shrockworks full skids, custom built rear bumper, Maxxis Bighorn 255/85's, TBU
owyheerat is offline   Reply With QuoteReply With Quote
Old 03-07-2020, 03:07 PM #41
rickashay's Avatar
rickashay rickashay is offline
Senior Member
 
Join Date: Dec 2010
Location: Nelson, BC
Posts: 2,408
Real Name: Addison
rickashay is a jewel in the rough rickashay is a jewel in the rough rickashay is a jewel in the rough rickashay is a jewel in the rough
rickashay rickashay is offline
Senior Member
rickashay's Avatar
 
Join Date: Dec 2010
Location: Nelson, BC
Posts: 2,408
Real Name: Addison
rickashay is a jewel in the rough rickashay is a jewel in the rough rickashay is a jewel in the rough rickashay is a jewel in the rough
Quote:
Originally Posted by owyheerat View Post
Addison,

I'm late to this discussion. I am very interested in this topic though. I currently am running 861's w/ Tokico LC shocks. I love the flex, but wish the ride height was a little lower. Also, they are too stiff.
For reference, I have a Bandit design rear bumper with dual swing outs (which is heavy) and 35" spare, rear storage / sleeping platform, fridge, Rago rear window panels (full) and usually my 70lb golden retriever. So I'm guessing 400+lbs. And the 861's are still too stiff.

Have you made a decision yet?

Is Dobinson the solution?

Thanks

Durwin
No movement on my behalf yet. I have decided to keep my 7 wraps until my Eimkeith rear bumper is on and the F150 fuel tank swap has been completed. Once the weight stabilizes, I will start trying coils.
rickashay is offline   Reply With QuoteReply With Quote
Old 03-07-2020, 03:32 PM #42
eimkeith's Avatar
eimkeith eimkeith is offline
Official Vendor
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,322
eimkeith is a jewel in the rough eimkeith is a jewel in the rough eimkeith is a jewel in the rough eimkeith is a jewel in the rough
eimkeith eimkeith is offline
Official Vendor
eimkeith's Avatar
 
Join Date: Aug 2008
Location: Charlotte, NC
Posts: 1,322
eimkeith is a jewel in the rough eimkeith is a jewel in the rough eimkeith is a jewel in the rough eimkeith is a jewel in the rough
Quote:
Originally Posted by rickashay View Post
No movement on my behalf yet. I have decided to keep my 7 wraps until my Eimkeith rear bumper is on and the F150 fuel tank swap has been completed. Once the weight stabilizes, I will start trying coils.
(same here)
__________________
keith
'96 SR5 - 3.4/5spd
check out the stuff I make
eimkeith is offline   Reply With QuoteReply With Quote
Old 03-09-2020, 01:50 PM #43
Fishwerks's Avatar
Fishwerks Fishwerks is offline
Senior Member
 
Join Date: Jan 2012
Location: Southwest
Posts: 1,058
Real Name: Chris
Fishwerks will become famous soon enough Fishwerks will become famous soon enough
Fishwerks Fishwerks is offline
Senior Member
Fishwerks's Avatar
 
Join Date: Jan 2012
Location: Southwest
Posts: 1,058
Real Name: Chris
Fishwerks will become famous soon enough Fishwerks will become famous soon enough
I ordered the Dobinson 675V last night.

Once I get them installed and get some drive time with them I will post here.

I was very close to buying the Toytec superflex but they aren't on the website right now (unless the part number changed?).
__________________
Fishwerks' Photo/Build Thread 2000 SR5 l White on White l 35s l Supercharged
--
2010 Trail Edition l Salsa Red Pearl l Stock
--
Instagram
Fishwerks is offline   Reply With QuoteReply With Quote
Old 03-09-2020, 06:13 PM #44
Wrecked - Rebuilt Wrecked - Rebuilt is offline
Junior Member
 
Join Date: Jun 2018
Location: Grand Rapids, MI
Posts: 15
Real Name: Matt
Wrecked - Rebuilt is on a distinguished road
Wrecked - Rebuilt Wrecked - Rebuilt is offline
Junior Member
 
Join Date: Jun 2018
Location: Grand Rapids, MI
Posts: 15
Real Name: Matt
Wrecked - Rebuilt is on a distinguished road
Definitely keep us posted on how the 675v work for you. I've been in the market for new rear coils for the last year and have been weighing all options.

I currently have the Dobinsons 137v (50mm) for the 4runner/Surf. They are very progressive 170/240/320 ft/lbs and hold weight well, but aren't tall enough with the longer LC Shocks. If they were a 70mm free height coil they'd be perfect.

Also, I spoke to Toytec about the Superflex rear coils. They have been discontinued due to low interest. Toytec recommended the OME861, but they are too tall for my liking.

I have also considered the Dobinsons 210v 182/217 ft/lbs, and reason you chose the 675v over the 210v?
Wrecked - Rebuilt is offline   Reply With QuoteReply With Quote
Old 03-10-2020, 02:12 PM #45
CT135 CT135 is offline
Member
 
Join Date: Jul 2019
Location: Oregon
Posts: 68
CT135 is on a distinguished road
CT135 CT135 is offline
Member
 
Join Date: Jul 2019
Location: Oregon
Posts: 68
CT135 is on a distinguished road
I have some OME 861's in my garage (brand new) that I was planning on throwing on when my rear bumper and swing out finishes. After reading about the Dobinson C59-210V LC springs I think i'm going to ditch the OME and go with the DObinsons. Seems like they hold weight well and give a little lower of a lift compared to the OME 861's and ride a bit better.
__________________
97 Limited, OME 883/891, Built Right Fab UCA's, Custom Sliders, 255/80r17 Wildpeak AT3W
CT135 is offline   Reply With QuoteReply With Quote
Reply

Tags
3rd , coil , gen , rear , spring

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Coil Spring Changeout Franky_Dabbs 3rd gen T4Rs 6 12-10-2016 01:59 AM
Rear Coil Spring Replacement SouthAl 4th Gen T4Rs 6 07-26-2016 12:24 PM
PLZ HELP!! Rear spring coil question.. mironkedz 3rd gen T4Rs 0 11-24-2010 12:04 AM
Rear Coil Spring Spacer alp 3rd gen T4Rs 19 10-16-2010 12:22 PM
which rear coil spring????? lexustech 3rd gen T4Rs 4 10-12-2007 06:35 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 05:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020