01-10-2020, 10:50 AM
|
#1
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
2001-2002 Throttle Body Design Question
Hey Dudes, I have a question about the newer throttle body design that the 01 and 02 models have. With the 1996-2000 models, they have a screw on IAC valve on the bottom of it. With the 01 and 02 models, there is an obvious air bypass with 6 little air passage holes on the upper back side of the throttle plate with a fitting feeding the chamber the air holes lead to. There's an air bypass hose that attaches to that fitting. The air chamber is on the top of the throttle body and has a plate held on with 4 screws.
Here's a link to a Tacoma World thread that will give you a visual of what I'm talking about : 3.4L w/ ETCS TB cleaning | Tacoma World
So, here's my question, where does that air bypass hose lead and what on the motor is controlling sending air through that hose to the backside of the throttle plate so the engine gets the air it needs during idle? With the 96-00 models, it's obvious the IAC is controlling the delivery of air. I'm just trying to understand how the 01-02 models accomplish this.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
Last edited by mtbtim; 01-10-2020 at 10:55 AM.
|
|
Reply With Quote
|
01-10-2020, 01:29 PM
|
#2
|
Elite Member
|
|
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
|
Elite Member
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
There is two things going on on the 5VZ for idle air. The injectors are 'air assist' so there is an atmospheric pressure line that runs down to the fuel injectors and allows some air through at each injector (supposed to increase fuel atomization or fuel mixing).
Along with that is the normal idle-air controlling mechanism. On the 01/02, it is probably just holding the throttle plate itself open slightly for idle control. There should be some mechanical minimum or stop that keeps just enough air going to the engine in case of throttle plate failure, then a slight amount of throttle opening is electronic for idle control. That's how most modern DBW throttle plates work.
-Charlie
__________________
'99 4Runner SR5 Auto - 4WD swapped
'89 Camry Alltrac LE 3S-GTE 5spd
'17 Chevy Volt Premier
'16 Honda Odyssey Elite
Previous: '88 Camry Alltrac LE 3S-GE BEAMS, 90 Camry 3S-GTE, 90 Camry DX, '03 WRX wagon, '08 Outback XT
|
|
Reply With Quote
|
01-10-2020, 02:01 PM
|
#3
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by phattyduck
There is two things going on on the 5VZ for idle air. The injectors are 'air assist' so there is an atmospheric pressure line that runs down to the fuel injectors and allows some air through at each injector (supposed to increase fuel atomization or fuel mixing).
Along with that is the normal idle-air controlling mechanism. On the 01/02, it is probably just holding the throttle plate itself open slightly for idle control. There should be some mechanical minimum or stop that keeps just enough air going to the engine in case of throttle plate failure, then a slight amount of throttle opening is electronic for idle control. That's how most modern DBW throttle plates work.
-Charlie
|
Thanks for the response Charlie. I don't believe there is anything that could hold the throttle plate partially open on these throttle bodies. It's purely a mechanical cable driven device just like it is on the 1996-2000 models. That's at least what I can surmise by looking at it. If you look at the Tacoma World link I shared, there clearly is a system of providing air to the backside of the throttle plate through those 6 small holes. What I don't know is what mechanism the engine is using to deliver the air there. Unless those 6 holes are there for a different purpose. I'm assuming that's the mechanism being used to deliver the air to the engine during idling conditions.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
|
|
Reply With Quote
|
01-10-2020, 07:37 PM
|
#4
|
Elite Member
|
|
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
|
Elite Member
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
There is a clutch that disengages the throttle cable from the throttle body so the motor can take over when the engine is operating. The direct cable actuation is a fail-safe that Toyota kept around until they had the DBW thing figure out...
-Charlie
__________________
'99 4Runner SR5 Auto - 4WD swapped
'89 Camry Alltrac LE 3S-GTE 5spd
'17 Chevy Volt Premier
'16 Honda Odyssey Elite
Previous: '88 Camry Alltrac LE 3S-GE BEAMS, 90 Camry 3S-GTE, 90 Camry DX, '03 WRX wagon, '08 Outback XT
|
|
Reply With Quote
|
01-10-2020, 09:50 PM
|
#5
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by phattyduck
There is a clutch that disengages the throttle cable from the throttle body so the motor can take over when the engine is operating. The direct cable actuation is a fail-safe that Toyota kept around until they had the DBW thing figure out...
-Charlie
|
You lost me Charlie. The throttle cable is attached to the gas pedal. When you push it, the throttle plate opens and when you release it the throttle plate closes. I think I'm more confused than when I started this thread. I don't see how the engine would "take over" the control of the throttle adjustment unless it was a true drive by wire set-up with no cable. So, you're saying these 01 and 02 models are using both DBW and Cable actuated throttle control?
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
|
|
Reply With Quote
|
01-10-2020, 10:43 PM
|
#6
|
|
Elite Member
|
|
Join Date: May 2017
Location: Western PA
Posts: 6,037
Real Name: Jon
|
|
Elite Member
Join Date: May 2017
Location: Western PA
Posts: 6,037
Real Name: Jon
|
Quote:
Originally Posted by mtbtim
You lost me Charlie. The throttle cable is attached to the gas pedal. When you push it, the throttle plate opens and when you release it the throttle plate closes. I think I'm more confused than when I started this thread. I don't see how the engine would "take over" the control of the throttle adjustment unless it was a true drive by wire set-up with no cable. So, you're saying these 01 and 02 models are using both DBW and Cable actuated throttle control?
|
Yes they do. They kept the cable as a fail safe but the 01 and 02 are a hybrid drive by wire. The servo motor controls the throttle plate. This is why these throttle bodys cost a fortune for new ones.
It's not like the modern throttle by wire as the cable is still there.
I know it's an odd config but that's what Charlie is saying.
Sent from my SM-J337V using Tapatalk
__________________
7 3rd gens listed in the build thread (2 are parts mobiles)
Build Thread: https://www.toyota-4runner.org/3rd-g...os-builds.html
Brillo's Bucket Fluid Ex changer: https://www.toyota-4runner.org/3rd-g...ml#post3358086
Sparks Plugs Wire and Coil Information: https://www.toyota-4runner.org/3rd-g...on-5vz-fe.html
|
|
Reply With Quote
|
01-10-2020, 11:52 PM
|
#7
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by brillo_76
Yes they do. They kept the cable as a fail safe but the 01 and 02 are a hybrid drive by wire. The servo motor controls the throttle plate. This is why these throttle bodys cost a fortune for new ones.
It's not like the modern throttle by wire as the cable is still there.
I know it's an odd config but that's what Charlie is saying.
Sent from my SM-J337V using Tapatalk
|
Ok, I get it. But, do we know how the engine is getting the air it needs during idling with this throttle body? Charlie thinks the computer is sending a signal for the motor to open the throttle plate a little. If that's is the case, what's the purpose of the six small holes on the backside of the throttle plate. Guys have reported having an idling issue after cleaning their throttle body. Once they realized they ended up pushing a bunch of crap into those 6 small holes during the cleaning and they cleared them out, their idle went back to normal.
Can anyone tell me on their 01 or 02 model where the hose goes that attaches to the nipple on the top left of the throttle body? It goes to the back side of the throttle body but I can't tell from the picture what it connects to. That's the hose that feeds the chamber where the 6 holes are found. On the 1996-2000 models, the air assist hose connects up to the bottom of IAC. This is the air assist system Charlie was talking about for the injectors and it's one of things we checked in the video we made of testing the IAC. It's possible the hose I'm referring to in the picture is the air assist hose for the injectors for the 01 and 02 models.
So, when these guys have cleaned their throttle body and inadvertently shoved debris into those 6 holes on the back side of the throttle plate, maybe they were negatively affecting the air assist system to the injectors.
Another thing I'm wondering about now with this 01 and 02 throttle body is could you throw off the calibration of the throttle plate since it's partially a DBW system? I remember watching a video about cleaning a throttle body and IAC and the guy mentioned he didn't think it would be smart to manually move the throttle place on a fully electronic throttle body because it could mess up the calibration. I'm just trying to understand why some guys have had a high idle after cleaning this newer style throttle body.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
Last edited by mtbtim; 01-11-2020 at 01:59 AM.
|
|
Reply With Quote
|
01-11-2020, 02:50 AM
|
#8
|
Member
|
|
Join Date: Dec 2019
Location: SW Washington
Posts: 595
|
|
Member
Join Date: Dec 2019
Location: SW Washington
Posts: 595
|
That hose goes to the injectors, just like on the 96-99 rigs.
In your video you called it an “Air assist” when you unplugged it for testing.
It goes down to a “y” and then to 2 nipples on the lower intake manifold. In the manifold there are 2 milled channels down each side of the manifold that intersect each of the injector ports.
In the throttle body on the 00-01 it looks to go into a chamber under that plate on top and then to your 6 holes. I’ve never removed that plate. Don’t know what’s inside.
For the 96-99 that hose goes to the IAC chamber.
It looks to me that it’s an uncontrolled path to the intake air that engine vacuum would pull air through and into the injector pintle caps.
Maybe that path supplies some of the idle air, but I don’t believe it’s the primary source.
__________________
Owned 82, 83, 87 pickup, 98, 99 SR5 4runner
Currently own a 98 SR5, 5spd, 4x4, e-locker, no sunroof. 2012 LTD with the normal options.
|
|
Reply With Quote
|
01-11-2020, 09:48 AM
|
#9
|
|
Senior Member
|
|
Join Date: Sep 2011
Location: Austin, Texas
Posts: 3,151
|
|
Senior Member
Join Date: Sep 2011
Location: Austin, Texas
Posts: 3,151
|
All I know is i only go so far as to clean the butterfly from the outside and I noticed on my '01 it does not shut completely when the engine is off. Mine hasn't given me issues, I just clean it a bit cuz I'm bored.
So it seems idle air is mechanical for a base rpm with perhaps that fancy 'idle motor' to adjust rpms when the a/c cuts in and out.
Thought it was odd yet it works and she purrs like a kitten!
Luck and I do appreciate minds digging deeper into this gawd-awful 01-02 everyone loves to hate. : ^ )))
__________________
2001 Limited 4WD - 346+K - SunfireRed\Thunder Cloud; - 265/75/16 Michelin A/T2s - Fat Pat's 1.5" BL - StopTech ANGLED rotors - In series 699 trans cooler, New Yota1 transmission, All new OEM suspension front to rear.
|
|
Reply With Quote
|
01-11-2020, 10:55 AM
|
#10
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by Dieselchessy
That hose goes to the injectors, just like on the 96-99 rigs.
In your video you called it an “Air assist” when you unplugged it for testing.
It goes down to a “y” and then to 2 nipples on the lower intake manifold. In the manifold there are 2 milled channels down each side of the manifold that intersect each of the injector ports.
In the throttle body on the 00-01 it looks to go into a chamber under that plate on top and then to your 6 holes. I’ve never removed that plate. Don’t know what’s inside.
For the 96-99 that hose goes to the IAC chamber.
It looks to me that it’s an uncontrolled path to the intake air that engine vacuum would pull air through and into the injector pintle caps.
Maybe that path supplies some of the idle air, but I don’t believe it’s the primary source.
|
Thanks for your response. I think I finally have all the pieces of the puzzle. What
@ phattyduck
said at first that there must be a mechanical minimum stop for the throttle plate was confirmed by
@ jgue467
. Your comment about where that hose goes confirms it's for the air assist system to the injectors. Just like the 96-00 models, there is a free flow of air that runs through to the intake manifold and to the injectors. On the 96-00 throttle body, the IAC has 3 distinct chambers. Two of these are chambers allow air to pass through from the front of the throttle plate to behind the throttle plate that the mechanical door of the IAC controls to give the engine the air it needs when idling. These chambers also feed the air assist system and it's always getting the air it needs whether it's when the engine is idling and the IAC is providing the path for air or it gets it's air when the throttle plate is opened and the IAC valve closes.
The 3rd chamber is for the coolant to travel through. For a final question for the 96-00 models, why did the Toyota engineers have coolant running through the IAC? Does super cold conditions negatively affect the function of the IAC?
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
|
|
Reply With Quote
|
01-11-2020, 12:44 PM
|
#11
|
Member
|
|
Join Date: Dec 2019
Location: SW Washington
Posts: 595
|
|
Member
Join Date: Dec 2019
Location: SW Washington
Posts: 595
|
They run coolant through both model throttle bodies, and most modern vehicles.
Keeps the throttle from freezing up in cold climates AFAIK.
Hot rodders bypass it and claim power gains due to colder intake air.
Similar theory to throttle body spacer/thermal shield.
__________________
Owned 82, 83, 87 pickup, 98, 99 SR5 4runner
Currently own a 98 SR5, 5spd, 4x4, e-locker, no sunroof. 2012 LTD with the normal options.
Last edited by Dieselchessy; 01-11-2020 at 12:49 PM.
|
|
Reply With Quote
|
01-11-2020, 01:04 PM
|
#12
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by Dieselchessy
They run coolant through both model throttle bodies, and most modern vehicles.
Keeps the throttle from freezing up in cold climates AFAIK.
Hot rodders bypass it and claim power gains due to colder intake air.
Similar theory to throttle body spacer/thermal shield.
|
Ok, gotcha. I thought since the coolant was flowing through the IAC it was more for it's function than the throttle body function. But, through the process of conduction, it would heat up the area right around the throttle plate eventually. I imagine they also wanted to to make sure the IAC door wouldn't freeze up either and move freely.
Thanks for all the responses guys. I now understand better how these throttle bodies work.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
|
|
Reply With Quote
|
01-13-2020, 02:18 PM
|
#13
|
Elite Member
|
|
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
|
Elite Member
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
Quote:
Originally Posted by Dieselchessy
They run coolant through both model throttle bodies, and most modern vehicles.
Keeps the throttle from freezing up in cold climates AFAIK.
|
It doesn't even have to be below freezing. The action of the air going from atmospheric pressure to intake manifold vacuum cools the air down (opposite of compressing it in a turbo or supercharger). If the air is moist and near freezing, it can cause both below freezing temps and condensation.
It is run through the idle-air motor, as that is where the air passes through most when there is a large difference in ambient to manifold pressure. Ice can build up and either block passages or freeze the actuator.
-Charlie
__________________
'99 4Runner SR5 Auto - 4WD swapped
'89 Camry Alltrac LE 3S-GTE 5spd
'17 Chevy Volt Premier
'16 Honda Odyssey Elite
Previous: '88 Camry Alltrac LE 3S-GE BEAMS, 90 Camry 3S-GTE, 90 Camry DX, '03 WRX wagon, '08 Outback XT
|
|
Reply With Quote
|
01-13-2020, 02:35 PM
|
#14
|
Elite Member
|
|
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
|
Elite Member
Join Date: Mar 2016
Location: Pasadena, CA
Posts: 5,414
|
Quote:
Originally Posted by mtbtim
You lost me Charlie. The throttle cable is attached to the gas pedal. When you push it, the throttle plate opens and when you release it the throttle plate closes. I think I'm more confused than when I started this thread. I don't see how the engine would "take over" the control of the throttle adjustment unless it was a true drive by wire set-up with no cable. So, you're saying these 01 and 02 models are using both DBW and Cable actuated throttle control?
|
The throttle body has an electronic clutch that disconnects the throttle cable from the throttle plate in normal operation. When the key is Off, the clutch re-connects the throttle cable to the throttle plate and it will seem like a normal throttle connection.
There are actually two TPS sensors on the throttle body - one on the cable side (throttle 'demand') and one on the throttle body (actual throttle postion). There is also a motor that move the throttle plate when the throttle clutch disconnects the throttle cable from the throttle plate.
This has been discussed before:
2001 and 2002 Are NOT Drive By Wire
-Charlie
__________________
'99 4Runner SR5 Auto - 4WD swapped
'89 Camry Alltrac LE 3S-GTE 5spd
'17 Chevy Volt Premier
'16 Honda Odyssey Elite
Previous: '88 Camry Alltrac LE 3S-GE BEAMS, 90 Camry 3S-GTE, 90 Camry DX, '03 WRX wagon, '08 Outback XT
|
|
Reply With Quote
|
01-13-2020, 06:58 PM
|
#15
|
|
Elite Member
|
|
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
|
Elite Member
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,278
Real Name: Tim
|
Quote:
Originally Posted by phattyduck
The throttle body has an electronic clutch that disconnects the throttle cable from the throttle plate in normal operation. When the key is Off, the clutch re-connects the throttle cable to the throttle plate and it will seem like a normal throttle connection.
There are actually two TPS sensors on the throttle body - one on the cable side (throttle 'demand') and one on the throttle body (actual throttle postion). There is also a motor that move the throttle plate when the throttle clutch disconnects the throttle cable from the throttle plate.
This has been discussed before:
2001 and 2002 Are NOT Drive By Wire
-Charlie
|
Thanks for the response and link to the other thread Charlie.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
|
|
Reply With Quote
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
|