Quote:
Originally Posted by INDwinak
Thanks all! Hopefully this is something that I can put back without having to take off the belts, fan, or radiator.
🤞
Hopefully I can find the process and torque spec somewhere in the FSM.
|
No you should be good. A flashlight or a small mirror helps since some of the bolt locations are a little tricky to see looking straight down. I attached the page from the FSM. There's 6 bolts total and they are torqued to
9 N·m (90 kgf·cm, 80 in.·lbf). That's essentially just a tad tighter than finger tight, only snug enough so it doesn't fall back out again.