[The bear]

Hey folks do you know the length of UCA bolt for 98 4runner?

I have a BCC UCAs which are Total Chaos replica if I understand it correctly. and driver-side bolt is bent. According to the manufacturer stock bolt should be used, however, the one I got from the Toyota dealer is roughly a nut length too short so I wonder if they gave me the wrong bolt?

I've called a few dealers but they don't know the dimensions and don't have them in stock to measure.

[Sparky 97Runner]

Total length including the bolt head on my 97 with stock UCAs is 12 3/4". Should be the same for 98. The threads stick out 1/2" past the nut.

[The bear]

Originally Posted by Sparky 97Runner

Total length including the bolt head on my 97 with stock UCAs is 12 3/4". Should be the same for 98. The threads stick out 1/2" past the nut.

Thank you for the measurements.
The one I got from Toyota is exactly the same. But the ones I have now seems to be longer (hard to measure on without removing the bolt) and threads stick out by slightly over an inch. Interesting

[orbot]

Want longer bolts get a 4th gen or 2nd gen taco bolts they are like 2” longer

[The bear]

Originally Posted by orbot

Want longer bolts get a 4th gen or 2nd gen taco bolts they are like 2” longer

good info, thank you! do you know the length by any chance?
I've pulled one bolt today and it's 3 cm longer than the one from the dealer.

322 mm vs 352 mm

it's still very confusing because total chaos insists that the stock bolt should be used.

[turbo8]

What is the width of your upper control arm? I can measure my TC upper arms when I get home.