My overall goal was to fit the 265/75R16 tires with a small amount of ride height increase. Also I did not want the ride to be any stiffer than stock, which I really can't verify because the springs and shocks I took off the truck were so bad I can't use them for reference. The ride is a little stiffer than it was before with the old suspension. For the little amount of travel the stock geometry provides I wanted it to be as supple as possible. I will update the tread with hub-to-fender measurements later today. Tires are Mickey Thompson MTZ P3s on 2000 16" Tundra wheels.
Front:
Bilstein B8 5100 front shocks: 24-248730
I currently have the springs installed on the shocks at the second perch up from the bottom.
AC Delco 1999 tall front springs - 4WD with 16" wheels: 45H0368
The AC Delco front springs also had the driver's side marked so that was a nice touch, and they were only $57.
KYB front strut mount: SM5184
Rear:
Bilstein B8 5100 rear shocks: 24-249966
AC Delco 1999 tall rear springs - 4WD with 16" wheels: 45H2131
The AC Delco rear springs are progressive rate, and they were only $39.
Whiteline W73420 20mm rear spring isolator spacer