Quote:
Originally Posted by datsuyama
Are the locks going fully up and down? If the actuators are tired and they are not going fully up and down during the programming sequence, it will fail. You'll need to "help" them by manually pulling them up and pushing them down as you cycle the lock/unlock button.
I had the same issue and this technique worked like a champ. Alternately, you can use a second key to cycle the locks as you push the buttons.
It's a pain in the ass to get the rhythm but you'll get it.
|
Quote:
Originally Posted by texadelphia
There is zero response after hitting the button on the new remote. Nothing moves, no lights flash, no beeps or noises.
Push the green button on the box under the seat.
Security light comes on.
Hit button on remote.
Nothing.
I have an original fob that I'm able to program just fine.
Sent from my moto x4 using Tapatalk
|
You guys are talking about two different programming methods. The method datsuyama is talking about applies to the newer models (99-02, IIRC) and the method texadelphia is trying applied to the older models.
I have a '98, which is also the older programming method. You're doing it right, tex, it just sounds like the remote you have doesn't interface with the system. I had the same problem with another key fob. Once I got the one that I linked in my other post it worked right away.