User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-22-2021, 08:25 PM #1
mtbtim's Avatar
mtbtim mtbtim is offline
Elite Member
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
mtbtim mtbtim is offline
Elite Member
mtbtim's Avatar
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
Door Stopper Repair

Hey Dudes,

Are you tired of your doors not staying open for you? If so, this video might interest you. I learned of this repair from @JZiggy aka Jordan.


__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
mtbtim is offline   Reply With QuoteReply With Quote
Old 01-22-2021, 09:23 PM #2
toverturf toverturf is offline
Member
 
Join Date: Apr 2020
Location: Northern Utah
Posts: 189
toverturf will become famous soon enough toverturf will become famous soon enough
toverturf toverturf is offline
Member
 
Join Date: Apr 2020
Location: Northern Utah
Posts: 189
toverturf will become famous soon enough toverturf will become famous soon enough
My driver side front door is definitely in need of repair so this video is perfect. Thanks again for all the videos you make. Has helped me out a ton.
__________________
1999 Limited with rear locker.
Sherpa Matterhorn | Sonoran Steel Diff Drop | SPC UCAs | DuroBumps Front and Rear | OME 890 Springs and Black Tokico Shocks | Eimkeith Reinforcements and PCK | King Coilovers | OCD Sway Bar Links | Opt Offroad Rear Arms | Lil Skips Gas Tank Skid Plate | FGP Rock Sliders | 4x Innovations Rear Plate Bumper with tire carrier
toverturf is offline   Reply With QuoteReply With Quote
Old 01-22-2021, 09:39 PM #3
JZiggy's Avatar
JZiggy JZiggy is offline
Senior Member
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
JZiggy JZiggy is offline
Senior Member
JZiggy's Avatar
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
Thanks for the video, Tim! I'm glad you wanted to share this cool repair. I'm really happy with how it turned out on my driver's door and am planning to do the other doors soon.

I also have a full set of used stoppers I'm planning to rebuild with an extra kit I bought... figured someone on the board would be interested -- maybe we could do a trade and then I could rebuild the next set! "JZiggy door thingy refurbishment service"
JZiggy is offline   Reply With QuoteReply With Quote
Old 01-22-2021, 10:32 PM #4
shadow247's Avatar
shadow247 shadow247 is offline
Senior Member
 
Join Date: Feb 2012
Location: DFW, TX
Posts: 2,056
shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice
shadow247 shadow247 is offline
Senior Member
shadow247's Avatar
 
Join Date: Feb 2012
Location: DFW, TX
Posts: 2,056
shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice shadow247 is just really nice
Nice video Tim! Always love to see what you are up to in the garage! I paid right around 50 bucks for a single door check off an ebay seller direct from Japan, so you are about right there! I wish I had seen this kit last year! The other ones on my rig are near perfect as no one really used the back seat or passenger seat.
__________________

The 4Runner Show
shadow247 is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 01:39 AM #5
mtbtim's Avatar
mtbtim mtbtim is offline
Elite Member
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
mtbtim mtbtim is offline
Elite Member
mtbtim's Avatar
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
Quote:
Originally Posted by JZiggy View Post
Thanks for the video, Tim! I'm glad you wanted to share this cool repair. I'm really happy with how it turned out on my driver's door and am planning to do the other doors soon.

I also have a full set of used stoppers I'm planning to rebuild with an extra kit I bought... figured someone on the board would be interested -- maybe we could do a trade and then I could rebuild the next set! "JZiggy door thingy refurbishment service"
I messaged our Russian Comrades and they are stoked about the video. I'm hoping they ship me some Russian Vodka.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
mtbtim is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 02:34 PM #6
Washingtonian Washingtonian is offline
Junior Member
 
Join Date: Jan 2021
Location: Silverdale
Posts: 4
Washingtonian is on a distinguished road
Washingtonian Washingtonian is offline
Junior Member
 
Join Date: Jan 2021
Location: Silverdale
Posts: 4
Washingtonian is on a distinguished road
Enjoyed the video, particularly where he uses different size drill bits to drill out one side of the spot weld on the cover. Not sure if I missed it, but I didn't notice where he either epoxied or spot welded the cover back on. Not sure what would hold it. Two thoughts: I think that I would just replace the driver's door mechanism with one from the mostly unused back door. I know I would give up the first half open hold, but don't think that is used very much. Also, this might be a quick way to tell the difference between a 150K mile and a 250K mile vehicle.
Washingtonian is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 02:39 PM #7
Malcolm99's Avatar
Malcolm99 Malcolm99 is offline
Member
 
Join Date: May 2020
Location: Ontario
Posts: 424
Malcolm99 has a spectacular aura about Malcolm99 has a spectacular aura about
Malcolm99 Malcolm99 is offline
Member
Malcolm99's Avatar
 
Join Date: May 2020
Location: Ontario
Posts: 424
Malcolm99 has a spectacular aura about Malcolm99 has a spectacular aura about
The spot weld looks likes it just holds everything together for production and assembly line purposes, once bolted to the door it is bolted together making the lack of spot weld a non issue.
__________________
99' Ltd E-locker grey wired, 4R Bilstein 5100, 99 tall coils, 906 OME & 1.5" spacers, 2015 4R Trail Edition 275/70R17, 1" RB BL
97' SR5 E-locker grey wired, Warn winch, 2" RB BL, Sonoran Steel 1.2 lift, dual battery, 1000W inverter, Hydraulic Arctic plow, 12" x 33" Baja Claw
92' Eclipse GSX AWD 6/4 bolt combo, 28 PSI boost, Meth injection, 750cc injectors, FMIC, 2.5" IC piping, full 3" exhaust, 350AWHP, lowered, Alum flywheel, 6 puck Clutch, Cams, JDM gear set,VC rear diff, EPROM ECU
Malcolm99 is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 04:54 PM #8
mtbtim's Avatar
mtbtim mtbtim is offline
Elite Member
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
mtbtim mtbtim is offline
Elite Member
mtbtim's Avatar
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
Quote:
Originally Posted by Malcolm99 View Post
The spot weld looks likes it just holds everything together for production and assembly line purposes, once bolted to the door it is bolted together making the lack of spot weld a non issue.
This is correct. Once the door checker is bolted to the door, the two halves stay together. The tack welds aren't needed. I forgot to mention this in the video.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
mtbtim is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 05:00 PM #9
mtbtim's Avatar
mtbtim mtbtim is offline
Elite Member
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
mtbtim mtbtim is offline
Elite Member
mtbtim's Avatar
 
Join Date: Feb 2015
Location: San Jose, California
Age: 58
Posts: 5,264
Real Name: Tim
mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute mtbtim has a reputation beyond repute
Quote:
Originally Posted by Washingtonian View Post
Enjoyed the video, particularly where he uses different size drill bits to drill out one side of the spot weld on the cover. Not sure if I missed it, but I didn't notice where he either epoxied or spot welded the cover back on. Not sure what would hold it. Two thoughts: I think that I would just replace the driver's door mechanism with one from the mostly unused back door. I know I would give up the first half open hold, but don't think that is used very much. Also, this might be a quick way to tell the difference between a 150K mile and a 250K mile vehicle.
See the two posts above regarding the spot welds.

As for swapping out one from the rear to the front, I don't know if I would do that on one of my rigs. You're probably right that most people open their doors all the way, but sometimes in tight parking situations, having that first stopping point might come in handy.
__________________
"My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
mtbtim is offline   Reply With QuoteReply With Quote
Old 01-23-2021, 05:18 PM #10
Skulking Skulking is offline
Member
 
Join Date: Nov 2018
Location: San Jose, CA
Posts: 522
Skulking is a jewel in the rough Skulking is a jewel in the rough Skulking is a jewel in the rough
Skulking Skulking is offline
Member
 
Join Date: Nov 2018
Location: San Jose, CA
Posts: 522
Skulking is a jewel in the rough Skulking is a jewel in the rough Skulking is a jewel in the rough
Quote:
Originally Posted by mtbtim View Post
See the two posts above regarding the spot welds.

As for swapping out one from the rear to the front, I don't know if I would do that on one of my rigs. You're probably right that most people open their doors all the way, but sometimes in tight parking situations, having that first stopping point might come in handy.
For what it's worth, the front door check and rear door strap have different part numbers, and are sided which means 4 unique parts one for each door. I'm not sure if the differences matter to a point where the swap wouldn't even be possible because parts don't fit, or if they would fit, but not retain the same functionality/ not function properly.
Skulking is offline   Reply With QuoteReply With Quote
Old 01-25-2021, 04:00 PM #11
blarchitect blarchitect is offline
Member
 
Join Date: Dec 2006
Location: Nassau
Posts: 292
blarchitect is on a distinguished road
blarchitect blarchitect is offline
Member
 
Join Date: Dec 2006
Location: Nassau
Posts: 292
blarchitect is on a distinguished road
Thanks Timmy T. This is an easy fix for an annoying as hell fault. Just ordered the kit from the Russian ebay seller. You didn't need to use the extra supplied shims?
blarchitect is offline   Reply With QuoteReply With Quote
Old 01-25-2021, 04:46 PM #12
JZiggy's Avatar
JZiggy JZiggy is offline
Senior Member
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
JZiggy JZiggy is offline
Senior Member
JZiggy's Avatar
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
Quote:
Originally Posted by blarchitect View Post
Thanks Timmy T. This is an easy fix for an annoying as hell fault. Just ordered the kit from the Russian ebay seller. You didn't need to use the extra supplied shims?
In our case it doesn't seem that we usually need them. I think they are there in case your stopper rod is also worn out, not just the plastic pieces inside. The ones I have rebuilt had plenty of holding power without the shims.
JZiggy is offline   Reply With QuoteReply With Quote
Old 01-25-2021, 10:47 PM #13
pluton's Avatar
pluton pluton is offline
Senior Member
 
Join Date: Nov 2012
Location: Santa Monica, CA
Posts: 1,415
Real Name: Keith
pluton has a spectacular aura about pluton has a spectacular aura about pluton has a spectacular aura about
pluton pluton is offline
Senior Member
pluton's Avatar
 
Join Date: Nov 2012
Location: Santa Monica, CA
Posts: 1,415
Real Name: Keith
pluton has a spectacular aura about pluton has a spectacular aura about pluton has a spectacular aura about
Thanks for bringing the knowledge!
I'll be interested to see how long the good function lasts. If it went 3 or 4 years, I guess it'd be worth it. I once bought a brand new door check for my driver's door. It was barely better than the worn-out one at first, and then it completely wore out in about a month. The design is suboptimal...it destroys itself. Look at the stay in a VW Golf --not an expensive car--- and you'll wonder how Toyota flunked this one!
__________________
97 4R SR5, 4WD/Elock, 3.4, 5spd. OME881/890 springs/OME shocks, 265/70/16 BFG AT/KO2.

Last edited by pluton; 01-25-2021 at 11:03 PM.
pluton is offline   Reply With QuoteReply With Quote
Old 01-25-2021, 10:56 PM #14
JZiggy's Avatar
JZiggy JZiggy is offline
Senior Member
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
JZiggy JZiggy is offline
Senior Member
JZiggy's Avatar
 
Join Date: Oct 2016
Location: Atlanta
Posts: 2,255
JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future JZiggy has a brilliant future
Quote:
Originally Posted by pluton View Post
Thanks for bringing the knowledge!
I'll be interested to see how long the good function lasts. If it went 3 or 4 years, I guess it'd be worth it. I once bought a brand new door check for my driver's door. It was barely better than the worn-out one at first, and then it completely wore out in about a month. The design is retarded...it destroys itself. Look at the stay in a VW Golf --not an expensive car--- and you'll wonder how Toyota flunked this one!
The factory plastic bits that bear against the rod are simple nylon plastic. These replacement ones are nylon filled with moly (MOS2) so I expect the wear will be much longer with more consistent friction. OEM+ in my mind
JZiggy is offline   Reply With QuoteReply With Quote
Old 08-30-2021, 01:07 AM #15
Unner's Avatar
Unner Unner is offline
Senior Member
 
Join Date: Nov 2014
Location: Huntsville, AL
Posts: 3,929
Unner is just really nice Unner is just really nice Unner is just really nice Unner is just really nice
Unner Unner is offline
Senior Member
Unner's Avatar
 
Join Date: Nov 2014
Location: Huntsville, AL
Posts: 3,929
Unner is just really nice Unner is just really nice Unner is just really nice Unner is just really nice
@mtbtim

Thank you for doing this video! This has made my rig much more pleasant to get in and out of.

I had some things I did in addition to your video that I thought might be useful to share with a larger audience, who may not read what I've posted in my build thread.

I hope you're OK with me copy and pasting the below from my build thread here for others to see. Maybe it will help them.

Also, @mtbtim and @JZiggy if either of you need a new bumper or two for your personal vehicles let me know and I will drop a couple in the mail for you, free of charge since you did the legwork on figuring this rebuild/mod out. I have extras from the junkyard since I didn't need to use any for experimenting. Let me know if you want any!

Quote:
Originally Posted by Unner View Post
I went ahead and rebuilt all the door checkers in the third gen. It’s not something you realize is an issue, until it is pointed out to you that your doors don’t stay open and they just fly open with the slightest effort.

The truck has over 280k miles on it now, and it’s seen some rough terrain. I also used to get in and out of the truck A LOT for work. Like probably 15+ door cycles a day for several years. So my door checkers were about as worn out as they could be, probably more worn than most with this mileage even.

Getting them out is simple and easy, just like Tim shows in the video. Getting them apart isn’t too bad either. Just drill out the spot welds like Tim shows. I will say that not all of mine were you able to access the side of the spot weld Tim uses in the video because of the positioning of the bolt, so I had to use a center punch and drill through the other side. No big deal.

20210823_181441 by Unner Unner, on Flickr

Like Tim mentions in the video, the “bumpers” for lack of a better word on the front doors were very worn and clinging on for life on mine. The way these bumpers had disintegrated had caused the metal stop plate that the bumper rests on to begin damaging the metal housing that the fixators rest in.

20210823_180636 by Unner Unner, on Flickr

The passenger one was a little bent up, but not too bad. The driver one was very bent. I had to straighten that housing out with a large diameter punch because there was no way it was going to go back together right with the new parts. Pics of the driver side one before straightening are below.

20210823_180730 by Unner Unner, on Flickr

I wanted to fix up these rubber bumpers because one, I didn’t want the metal housing to continue to get damaged and two, I wanted to have that nice cushion when the door does get opened all the way to the max. Gives it a little more luxury feel.

So, I started searching online to see if these were available, or how much a new checker would cost. The bushings are not available separately, and a new checker is $100. Not gonna happen when the whole rebuild kit was like $30 for all 4 doors.

While I was searching, I noticed that it looked like other Toyotas used the same style of bumpers on their checkers, namely Camry’s. I had the idea then that I might be able to harvest these from donor cars to use on my checkers. So, with the pick and pull junkyard being open another 90 minutes I threw some tools in a bag and headed out there.

There are never 4Runners here, so I wasn’t going to be able to pull them off donor 4Runner rear doors, but I did find a nice 2011 Camry. I popped open the rear door, got the panel off with a couple screws and some tugging and then the checker came right out just like the 4Runner ones. And it has the exact same bumper on it!

I didn’t want to buy the whole checker, because I had no need for the whole thing. I thought about trying to press that pin out of the end of the checker to get the new bushings on, but that seemed risky. What I did instead was took a very sharp razor blade and sliced the checker on the bottom side, straight up, You want to make a nice straight cut, until the rubber is able to be separated from itself. Now you can twist the bushing free of the checker.

Bingo, now you have a new bumper for your old 4Runner checkers. I went around the yard pulling various door panels seeing what vehicles had the same ones, and what kind of shape they were in. I pulled door panels off Camry’s from 1997-2011 and they all had the correct style of bumper. The Avalon uses a different system, and the Corolla doesn’t have the bumper at all from the factory. Makes sense being that it is the base model economy type car. I only bothered checking rear doors since they would be in the best shape overall. Some were in better shape then others, and by the time I was done I had a nice handful of them so I could experiment if needed. I went to pay and they let me go without a charge other than the $3 entry fee. So, for $3, and 90 minutes, including drive time I had a way to fix the checkers.

Old bumper versus junkyard bumper.

20210822_170119 by Unner Unner, on Flickr
The Junkyard ones slip right onto the 4Runner ones just like the originals.
20210822_170129 by Unner Unner, on Flickr

Now the only issue was that slice I had to put in there. You can probably just leave it like that without issue for awhile, but I wanted these to go another 280k miles. So what I did was put a little superglue into the cut on the bumper and then squeezed it together.

20210823_165248 by Unner Unner, on Flickr

And to make extra sure it wouldn’t come apart I wrapped it tight with a zip tie.

20210823_165431 by Unner Unner, on Flickr

After you do the rest of the rebuild per Tim’s video you just install as normal.

20210823_174105 by Unner Unner, on Flickr

A few pics from the rebuild process.

New versus old fixators.

20210823_105659 by Unner Unner, on Flickr
20210823_232107 by Unner Unner, on Flickr
20210823_170709 by Unner Unner, on Flickr

Good as new, and now I’m into the new door checkers about $35, maybe 8 hours total time, and saved about $350. Plus, I think these new checkers are stiffer than OEM ones, and will probably last longer. The doors feel really solid now, which is nice.
__________________
2008 Toyota 4Runner Limited 4x4 - Salsa Red, DD, Mostly Stock, 89k miles
2001 Toyota 4Runner SR5 4x4 - Not Stock, Lifted, Armored, 291k miles
1987 Toyota Supra N/A - Stock, 2nd Owner, 92k miles
Unner is offline   Reply With QuoteReply With Quote
Reply

Tags
@jziggy , aka , door , learned , repair

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help! Door actuator repair gone wrong. Can't open door at all. hellabove 4th Gen T4Rs 20 03-29-2018 09:29 AM
Post-Accident Door Repair? LawnDart 5th gen T4Rs 4 06-13-2016 12:41 PM
door ding repair? luv2eat 5th gen T4Rs 5 04-18-2011 12:45 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 12:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020