Quote:
Originally Posted by Bad Luck
Do a cylinder leak down test on cylinder number 2 with a cold engine and the radiator cap off. It's possible to have a failed head gasket where it fails between the cylinder and a coolant or oil passageway and only affect one cylinder.
|
The 97 SR5 project was that way. One cylinder with antifreeze pooled in a cylinder.
On a side note….since I bought the 97 knowing it’s engine was toast, I just pulled it and put it on a stand and pushed it into a corner. Big mistake. The antifreeze in the oil pan caused both intake cams to rust before I broke it down to rebuild. It sat almost two years. I won’t do that again.
Sent from my iPhone using Tapatalk