Hey Dudes, we had to cancel our last Timmy the Toolman Subscriber Appreciation Party because I got injured in a mountain bike crash, but I'm back in the saddle again so we rescheduled the party. I hope some of you can make it.
There's a Google doc link in the video description you can sign up on and you can email me for my address.
Happy Wrenching and Sic Mods for All!
t
__________________ "My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
I've been wanting to make it to one of these for awhile now and my schedule has never worked out. This year I think it will! Thank you for what you've done for this community.
Sent from my SM-G998U using Tapatalk
__________________
1989 4runner 'Marilyn', 3.0 5 spd, ball joint spacers with KYB monomax, OME springs with 5100s, 33x12.5 duratracs, 4.88s, ARB fr, open rear, smittybilt fr, trailgear rr.
2000 4runner SR5 sport w/ elocker, Fox 2.0s fr, tundra 5100s with OME890 rr
I am considering a Holy Grail 3rd Gen 2000, rear locker 4.30:1 gears. Your vids are super helpful and informative. Where are you located, I am in Arizona between Phoenix/Surprise and Prescott, great Mtn biking out here too! Tom
__________________
1978 FJ40. Mostly stock, reverse shackle 3 inch lift.
2019 Pro Voodoo Blue
Hey Dudes, we had to cancel our last Timmy the Toolman Subscriber Appreciation Party because I got injured in a mountain bike crash, but I'm back in the saddle again so we rescheduled the party. I hope some of you can make it.
There's a Google doc link in the video description you can sign up on and you can email me for my address.
Happy Wrenching and Sic Mods for All!
t
Glad you were not seriously hurt one of my crashes was on a MS150 bike ride going 19 to 20 mph when I nicked the front tire on the person in front of me and lost control. Luckily I didn't bust anything and finished the ride. I hung my bikes up when beforemy daughter was born fall of 2013 was my last ride. From Washington D. C to Pittsburgh in 5 days. Good times.
I seen some nasty crashes over the years and really glad I give it up. The only side effect of not riding is there is a lot more of me then their used to be.
Hey Dudes, we had to cancel our last Timmy the Toolman Subscriber Appreciation Party because I got injured in a mountain bike crash, but I'm back in the saddle again so we rescheduled the party. I hope some of you can make it.
There's a Google doc link in the video description you can sign up on and you can email me for my address.
Happy Wrenching and Sic Mods for All!
t
Holy crap, I never knew you were Timmy the toolman! I've seen many of your posts on the forum and obviously tons of your videos but never made the connection. Super cool. Thanks for the great vids and hope you recover well!
__________________
Quote:
Originally Posted by LittleCaesar
At 5'7", I'd need a rocket up the wazoo to get in it.
But it looks good. I can't wait to see it being driven.
I am considering a Holy Grail 3rd Gen 2000, rear locker 4.30:1 gears. Your vids are super helpful and informative. Where are you located, I am in Arizona between Phoenix/Surprise and Prescott, great Mtn biking out here too! Tom
San Jose, California. I've done some mtn biking in Arizona. I've ridden in Flagstaff, Sedona, rode the Rainbow Rim trail on the North rim of the Grand Canyon, and rode a little on the Arizona trail.
__________________ "My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
Glad you were seriously hurt one of my crashes was on a MS150 bike ride going 19 to 20 mph when I nicked the front tire on the person in front of me and lost control. Luckily I didn't bust anything and finished the ride. I hung my bikes up when beforemy daughter was born fall of 2013 was my last ride. From Washington D. C to Pittsburgh in 5 days. Good times.
I seen some nasty crashes over the years and really glad I give it up. The only side effect of not riding is there is a lot more of me then their used to be.
Glad you able to do your picnic now. :-)
Thanks Jon. Biking is part of me. I've been doing it for over 35 years. It's hard to give up.
__________________ "My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
Still have my Klein hard tails made in Washington. Had my favorite one, the Attitude with the Storm paint job, stolen though some year ago. Also still have a couple of Litespeeds and an Ibis Ti Mojo.
Won’t be able to make it. Take some good pics. Saving the spare change to buy another 3rd gen that needs some serious love from some dork who figured out rather quickly last year it isn’t a gas miser.
Some day I’m going to bring a convoy of rusty shitboxes to your party
You're more than welcome to bring your rusty shitboxes. Just don't expect me to work on it during the party because all the swearing and throwing shit might scare some of the guests.
__________________ "My old man is a television repairman, he's got this ultimate set of tools. I can fix it!"
You're more than welcome to bring your rusty shitboxes. Just don't expect me to work on it during the party because all the swearing and throwing shit might scare some of the guests.
We appreciate that. It's truly a shame what alot of the northern states do to keep the roads wet and clear in the winter.
Surprisingly though we already have most of the bolts and fasteners have all been removed and antiseized so they move freely.
We even maintenence them.
Maybe some day a group of us will take a trip out to visit your area. I just know it's not going to be this year because all randybodady does is work.. lol. I been telling him for years weekends are for wrenching on 3rd gens and junk yard runs. However, he won't listen to me.
Tim, would you do a Zoom meeting to get all others in the US and across the world to join? We could do something like 4wd247 beers in the shed... may be?
__________________
1990 3L Diesel Hilux LN 106; 1973 Ford Cortina XL
1992 4AFE Toyota Sprinter AE 91 (aka Geo Prizm)
1997 5vzfe 4Runner 4x4 (aka Hilux Surf)
2000 2uzfe 100 Series Land Cruiser
2021 Tacoma TRD Off-Road 4x4 6-speed