Quote:
Originally Posted by whyzee125
I got a crooked steering wheel after just replacing my rear control arm bushings with the Energy suspension poly bushings. I'd say it was off a good 10 degrees, and both the stock bushings and those basically have to 'center' so I'd say if I got that much off with the bushing replacement, you are VERY close to the stock location. Nice job!
|
The bushings in my old arms were not horrible looking.
When I first went to put the arms in I had to use a come-a-long to get the bolt holes lined up. Laying the old ones on top of the new ones the newer ones looked shorter by about 1/8”.
Edit: other than the steering wheel not being strait ahead the steering is tight and the rig tracks strait over bumps and tire grooves.
Sent from my iPhone using Tapatalk