problem solved.
we followed this except no speed bleeders were used. also re-bled the MC as per
@
phattyduck
's post
haven't bled the ABS actuator though. will have to look for a low traction surface long enough to allow me to play.
Thank you very much guys!! your help is very much appreciated!
Quote:
Originally Posted by 19963.4lsr5
Don’t pump the brakes before opening bleeder.
Let it sit overnight and then do another gravity bleed on all 4 corners until no air bubbles are in the clear hose.
Then bleeded with the pedal by doing this until no air bubbles are seen:
Open bleeder-push pedal to the floor-close bleeder-release pedal.
I don’t like speed bleeders…..and if you don’t have a friend that can listen to instructions them buy the Motive Pro pressure bleeder.
When you pump the brakes to make pressure you make a million air bubbles that end up everywhere
Black fluid means it’s absorbing moisture.
I use the synthetic dot 3/4
when I say “no air bubbles seen” I mean after a long while.
Sent from my iPhone using Tapatalk
|