Quote:
Originally Posted by 96RedRunner
Anyone running Rear Upr Lwr Pan bushings?
Thought I'd try them out on extra set of arms had laying around vs OE Black Friday under $200.
|
I am running the Front LCA bushings. I have a set of the rears on the bench, just waiting to get over to my buddies house with a press.
Removing the Old bushing from the arm is the hardest part. There is an Arrow on the bushing that appears to point to the Installation direction. I believe you should push the opposite of the arrow to make removal easier.
You will need a 28mm Socket or Press sleeve in order to remove the OEM bushings. you can also burn them out and try to cut the sleeves with and air hammer or hacksaw.