User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-19-2024, 10:23 AM #1
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Steering Wheel Issue

Last week I got a well overdue wheel alignment done. Truck tracks straight and no more steering wheel vibrations.

My issue is that sometimes my steering wheel will be center and then I could hit a bump just right, make a sharp turn, or brake hard and when I go to bring the truck back straight, the steering wheel will be off center.

Even when going straight and this happens, it still tracks straight and doesn't pull or anything. Now what's weird is if I do any of the above again, the steering wheel will go back to being straight. It is random.

I do get a popping noise in the front end usually when I turn to the left going slow in forward and reverse, not sure if these two are related in any way.

Before I call the alignment shop I wanted to see if anybody could point me in the right direction of what it could possibly be?
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 09-19-2024, 02:21 PM #2
Endlessblockades's Avatar
Endlessblockades Endlessblockades is offline
Senior Member
 
Join Date: May 2019
Location: Northern California
Posts: 1,865
Real Name: Blair
Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold
Endlessblockades Endlessblockades is offline
Senior Member
Endlessblockades's Avatar
 
Join Date: May 2019
Location: Northern California
Posts: 1,865
Real Name: Blair
Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold Endlessblockades is a splendid one to behold
The popping might be coming from your sway bar end links. I'd make sure they aren't bent or loose. The 2 issues probably aren't related, however.
__________________
Y2K LTD/E 262K
Endlessblockades is offline   Reply With QuoteReply With Quote
Old 09-19-2024, 03:34 PM #3
GhostRing's Avatar
GhostRing GhostRing is offline
Member
 
Join Date: Mar 2013
Location: Bendo
Posts: 779
GhostRing has a spectacular aura about GhostRing has a spectacular aura about GhostRing has a spectacular aura about
GhostRing GhostRing is offline
Member
GhostRing's Avatar
 
Join Date: Mar 2013
Location: Bendo
Posts: 779
GhostRing has a spectacular aura about GhostRing has a spectacular aura about GhostRing has a spectacular aura about
Did the popping only happen after the alignment?
I would make sure your OTR jam nuts are actually tightened
and that the ball joint nut is correctly torqued & pinned.
Especially if someone was recently under there fiddling around.
__________________
Build Etc...
If it ain't broke, fix it 'til it is.
GhostRing is offline   Reply With QuoteReply With Quote
Old 09-19-2024, 05:03 PM #4
AuSeeker AuSeeker is offline
Senior Member
 
Join Date: Nov 2016
Location: South Carolina
Posts: 4,926
Real Name: Skip
AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future
AuSeeker AuSeeker is offline
Senior Member
 
Join Date: Nov 2016
Location: South Carolina
Posts: 4,926
Real Name: Skip
AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future AuSeeker has a brilliant future
Check your intermediate steering shaft to see if it has any play in the u joint/s, also check the rag joint for being worn out.
__________________
2004 Limited V8
AuSeeker is offline   Reply With QuoteReply With Quote
Old 09-20-2024, 08:00 AM #5
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Quote:
Originally Posted by GhostRing View Post
Did the popping only happen after the alignment?
I would make sure your OTR jam nuts are actually tightened
and that the ball joint nut is correctly torqued & pinned.
Especially if someone was recently under there fiddling around.
The popping noise was before the alignment. I guess it could be sway bar end link related like @Endlessblockades said. Only happens when turning slow.

I'll get under there to check to make sure everything is tight.
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 09-20-2024, 10:00 AM #6
96RedRunner's Avatar
96RedRunner 96RedRunner is offline
Senior Member
 
Join Date: Jun 2016
Location: MS
Posts: 2,662
Real Name: Mark
96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold
96RedRunner 96RedRunner is offline
Senior Member
96RedRunner's Avatar
 
Join Date: Jun 2016
Location: MS
Posts: 2,662
Real Name: Mark
96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold 96RedRunner is a splendid one to behold
@Kmurt , I've had the pop turning been swaybar links loose at frame aged/worn bushings.
Not going to affect return to center Rack bushings will be my first spot to lay eyes on.
Center rack bushing controls what you describe look for shiny clean metal on rack body
at saddle clamp indicates side movement left to right.
If you have 5VZ, valve cover leaks taken out many center bushings. $.0000002
__________________
96RedRunner limited 4x4 5VZ auto not stock 374k miles totaled 2018.
2001 limited 4x4 5VZ auto work in progress not stock.
2011 Audi S5 Prestige 4.2 V8 6 spd. MT not stock.
96RedRunner is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 07:28 AM #7
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
UPDATE

Alright so I need some advice. I started digging into the front end to replace sway bar bushings and end links, new OEM outer tie rods (old tie rods had a lot of play) and new Energy Suspension polyurethane steering rack bushings.

Upon taking apart the "D" shaped bushing off the steering rack, I noticed the surface underneath is pretty rusty and deformed. So now I'm debating whether or not to just get a new rack since this is the original rack to the truck or to install the new bushings and hope everything is okay.

The rack itself appears to be leak free and there is no additional play on the inner tie rods. The truck is undercoated with WoolWax so that's why everything looks wet.

What do you guys think?

IMG_2572

IMG_2574

IMG_2567
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 08:49 AM #8
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Tbh, replace the rack. If it isn't leaking yet, it will soon. Pretty much every 3rd gen past 250k has a very high chance of needing a new rack. Did you pop the boots off the inner tie rod? Mine looked dry but I guess those OEM boots had no issue holding all that ATF in it after I flushed it.
T4R2014 is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 09:58 AM #9
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Quote:
Originally Posted by T4R2014 View Post
Tbh, replace the rack. If it isn't leaking yet, it will soon. Pretty much every 3rd gen past 250k has a very high chance of needing a new rack. Did you pop the boots off the inner tie rod? Mine looked dry but I guess those OEM boots had no issue holding all that ATF in it after I flushed it.
That's what I'm leaning towards. I didn't take the boots off yet but I did grab both inner tie rods to move them around and in and out and they seemed fine to me.

I'm thinking at this point the original rack lasted 257,00 miles and 23 years so getting a new OEM rack will last me just as long and I will have everything new.

Funny how a simple bushing swap turns into this, oh well.
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 10:21 AM #10
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Quote:
Originally Posted by Kmurt View Post
Funny how a simple bushing swap turns into this, oh well.
That's how both of my rack replacements started. It's the new normal at this age, unless it was a garage queen. Also inspect the high pressure line going from the pump to the rack. The hard line gets rusty and it isn't the easiest job to repair. Sunsong makes a very good OEM copy.
T4R2014 is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 10:52 AM #11
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Quote:
Originally Posted by T4R2014 View Post
That's how both of my rack replacements started. It's the new normal at this age, unless it was a garage queen. Also inspect the high pressure line going from the pump to the rack. The hard line gets rusty and it isn't the easiest job to repair. Sunsong makes a very good OEM copy.
Thanks I'll check it out.

Do you have a link or any more info on this "Sunsong" hard line just in case I end up down this route?
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 10-10-2024, 11:16 AM #12
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Amazon.com
Quote:
Originally Posted by Kmurt View Post
Thanks I'll check it out.

Do you have a link or any more info on this "Sunsong" hard line just in case I end up down this route?
T4R2014 is offline   Reply With QuoteReply With Quote
Old 10-17-2024, 09:48 AM #13
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Quote:
Originally Posted by T4R2014 View Post
That's how both of my rack replacements started. It's the new normal at this age, unless it was a garage queen. Also inspect the high pressure line going from the pump to the rack. The hard line gets rusty and it isn't the easiest job to repair. Sunsong makes a very good OEM copy.
So I had to saw off the power steering lines going into the rack, they would not come loose and I was even using the proper flare nut wrench.

The power steering lines looked like they were do for a replacement so I did go ahead and order the Sunsong power steering lines and I'm glad I'm knocking this out too while I'm in this deep.
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Old 10-17-2024, 11:23 AM #14
T4R2014's Avatar
T4R2014 T4R2014 is offline
Elite Member
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
T4R2014 T4R2014 is offline
Elite Member
T4R2014's Avatar
 
Join Date: Jun 2011
Location: Shangrila
Posts: 5,097
T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold T4R2014 is a splendid one to behold
Quote:
Originally Posted by Kmurt View Post
So I had to saw off the power steering lines going into the rack, they would not come loose and I was even using the proper flare nut wrench.

The power steering lines looked like they were do for a replacement so I did go ahead and order the Sunsong power steering lines and I'm glad I'm knocking this out too while I'm in this deep.
Yup, moment I saw that you're in NJ I knew exactly what was going to happen.
T4R2014 is offline   Reply With QuoteReply With Quote
Old 10-17-2024, 01:00 PM #15
Kmurt's Avatar
Kmurt Kmurt is offline
Member
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Kmurt Kmurt is offline
Member
Kmurt's Avatar
 
Join Date: Jan 2015
Location: NJ
Posts: 269
Kmurt will become famous soon enough
Quote:
Originally Posted by T4R2014 View Post
Yup, moment I saw that you're in NJ I knew exactly what was going to happen.
You called it lol
__________________
2001 4Runner SR5 4x4
Kmurt is offline   Reply With QuoteReply With Quote
Reply

Tags
back , steering , straight , turn , wheel

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Steering Wheel Issue Hadelson 5th gen T4Rs 2 05-16-2020 03:58 PM
Steering Wheel Control Issue with Lights xnodesirex 5th gen T4Rs 0 06-19-2019 04:56 PM
Steering Wheel shake/ vibration (not a tire issue) Mullett757 4th Gen T4Rs 15 08-09-2018 10:42 AM
Aftermarket head unit, Factory JBL with steering wheel controls issue aceshi21 4th Gen T4Rs 5 02-19-2017 10:32 PM
Steering wheel re-cover and cold tranny issue Axewhlder 3rd gen T4Rs 3 02-06-2012 04:26 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020