Hello all,

New here, but not new to Toyotas or 4runners. Previously owned a 1st gen (86 IFS) and a rare 2dr 2nd gen.
My sister just gave me her 2WD 99 4runner, all stock with 200k mi on the clock. I'd like to lift it to stock 4WD height and replace the 15" wheels and run 16" steelies with 265/75/16 tires.

I've been reading about people running the 99 4Runner 4WD springs that are apparently 1" taller than other years. Can anyone tell me what part no. for the right springs?

I suspect the taller springs are the ones that I've put in bold letters below, but not sure.

48131 SPRING, FRONT COIL, RH
48131-35100 VZN180; L=324.0 1
48131-35230 VZN180..LULI 1
48131-35310 VZN180; L=344.0, W(265/70R16 TIRE) 1
48131-35430 VZN180; L=316.5 1

48132 SPRING, FRONT COIL, LH
48131-35110 VZN180; L=327.5 1
48131-35240 VZN180..LULI 1
48131-35320 VZN180; L=351.5, W(265/70R16 TIRE) 1
48131-35440 VZN180; L=322.5 1

Here is a post I did a few weeks ago on the '99 springs I bought.
I think they should also fit a 2wd 4Runner.
Good luck!


To look up / verify the part numbers, I went online to Autotrader and found a 99 Highlander. Got the vin. and used that # to check everything out.

Get ready for sticker shock at your local dealer (unless you have an "in") and I do. My source could not beat this price. Not to mention since I do not live in Texas, I had no tax to pay. All that adds up! I saved quite a bundle.

Front right 48131-35400 $81.35
Front left 48131-35350 $88.57
Rears ( same for both ) 48231-35210 $60.97 ea.