08-30-2010, 05:02 PM
|
#61
|
|
Senior Member
|
|
Join Date: Oct 2008
Location: So. Cali
Posts: 2,299
|
|
Senior Member
Join Date: Oct 2008
Location: So. Cali
Posts: 2,299
|
Brian,
Make sure to give me a call when your bumper comes in. Hopefully I will be available to give a helping hand in putting it on. Also you have my number shoot me a text when you guys are headed out on a run. I did White Mtn Sa****ay and it was just an off-day. Wish you had never left the driveway trip. Almsot flopped at first big climb and was overly sensitive to any off-camber after that. Like the build on your truck and look forward to seeing the bumper on it and being out on the trail with you again.
__________________
99 SR5 V6 4WD- just started
SOLD1998 T4R SR5 All-Pro CO's, UCA's and Sliders, SS 1.2 rear only DIY rear bumper, Aussie Locker and 1st gen roll bar mod. Outdoor Logic Front bumper, roof rack and Vision X lights.
|
|
Reply With Quote
|
08-30-2010, 05:25 PM
|
#62
|
|
Elite Member
|
|
Join Date: Dec 2009
Location: California
Posts: 5,470
|
|
Elite Member
Join Date: Dec 2009
Location: California
Posts: 5,470
|
Thanks Pikeman,
That sucks about White Mtn., did you still pass? That's good you didn't roll! We're hoping to have a little mod party and install our sliders and the bumper at Driffter33's house in Buena Park this sa****ay and then hopefully do some wheelin on sunday. But, it all depends on if all the parts get here by friday. Pure98 might join us and I'm sure Driffter wouldn't mind if you want to come over too! I'll let you know on friday if it's gonna happen...
__________________
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
|
|
Reply With Quote
|
08-30-2010, 05:35 PM
|
#63
|
|
Senior Member
|
|
Join Date: Oct 2008
Location: So. Cali
Posts: 2,299
|
|
Senior Member
Join Date: Oct 2008
Location: So. Cali
Posts: 2,299
|
Yeah still passed and got "Black Diamond Certification". I mean heck just a couple weeks earlier I was on much harder trails. I will probably have my kids this weekend but was heading into OC to spend with my parents. I can probably let them have Grandparent time while we have a mod party. My driver front got about 3ft+ in the air and passenger rear dropped into a hole and trail was already steep and off-camber passenger. I was crawling, came to stop and panicked when it lifted like that, inched forward and it climbed higher. After messing around a bit I got out of the situation ony my own, but still enough to have severe pucker factor.
__________________
99 SR5 V6 4WD- just started
SOLD1998 T4R SR5 All-Pro CO's, UCA's and Sliders, SS 1.2 rear only DIY rear bumper, Aussie Locker and 1st gen roll bar mod. Outdoor Logic Front bumper, roof rack and Vision X lights.
|
|
Reply With Quote
|
08-30-2010, 06:36 PM
|
#64
|
|
Senior Member
|
|
Join Date: Jun 2009
Location: Colorado refugee in Idaho
Age: 43
Posts: 2,466
|
|
Senior Member
Join Date: Jun 2009
Location: Colorado refugee in Idaho
Age: 43
Posts: 2,466
|
Quote:
Originally Posted by brian2sun
Thanks Pikeman,
That sucks about White Mtn., did you still pass? That's good you didn't roll! We're hoping to have a little mod party and install our sliders and the bumper at Driffter33's house in Buena Park this sa****ay and then hopefully do some wheelin on sunday. But, it all depends on if all the parts get here by friday. Pure98 might join us and I'm sure Driffter wouldn't mind if you want to come over too! I'll let you know on friday if it's gonna happen...
|
LOL is the board filtering the word Sa****ay ??? LOL thats hilarious!
|
|
Reply With Quote
|
08-30-2010, 06:41 PM
|
#65
|
|
Elite Member
|
|
Join Date: Dec 2009
Location: California
Posts: 5,470
|
|
Elite Member
Join Date: Dec 2009
Location: California
Posts: 5,470
|
Ya, it makes me laugh everyday. Sa *t u r d* ay.
__________________
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
|
|
Reply With Quote
|
08-30-2010, 07:32 PM
|
#66
|
|
Senior Member
|
|
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
|
Senior Member
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
All are welcome
__________________
2000 4RUNNER SR5 TRD Supercharger, OME 882's w/ topout's and n91sport strut up front.OME 851's w/ cones and trekmaster LC shocks in the rear. R.I. LED lighting, retrofit E locker, 1" diff drop, 315/75/16 cooper discoverer STT, 2" R.B. body lift, rear disc brake conversion, Ingen intake, Spectre cone filter, Fitch fuel cat, Cobra LTD29 CB, custom front, and rear bumper, smittybuilt 8000 # winch, 66" 4xinovations rock sliders w/kickout, lil skip's gas tank skid. Custom skid plates. My build thread is @ http://www.toyota-4runner.org/3rd-ge...ld-thread.html
|
|
Reply With Quote
|
08-30-2010, 08:34 PM
|
#67
|
|
Member
|
|
Join Date: May 2010
Location: So. Cal
Posts: 178
Real Name: Racerunner
|
|
Member
Join Date: May 2010
Location: So. Cal
Posts: 178
Real Name: Racerunner
|
Quote:
Originally Posted by Pikeman
Yeah still passed and got "Black Diamond Certification". I mean heck just a couple weeks earlier I was on much harder trails. I will probably have my kids this weekend but was heading into OC to spend with my parents. I can probably let them have Grandparent time while we have a mod party. My driver front got about 3ft+ in the air and passenger rear dropped into a hole and trail was already steep and off-camber passenger. I was crawling, came to stop and panicked when it lifted like that, inched forward and it climbed higher. After messing around a bit I got out of the situation ony my own, but still enough to have severe pucker factor.
|
Hey pikeman any starfish on the drivers seat?
|
|
Reply With Quote
|
08-30-2010, 09:23 PM
|
#68
|
|
Elite Member
|
|
Join Date: Dec 2009
Location: California
Posts: 5,470
|
|
Elite Member
Join Date: Dec 2009
Location: California
Posts: 5,470
|
Quote:
Originally Posted by racerunner
Hey pikeman any starfish on the drivers seat?
|
Haha, get's me everytime!
__________________
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
|
|
Reply With Quote
|
09-06-2010, 09:30 PM
|
#69
|
|
Elite Member
|
|
Join Date: Dec 2009
Location: California
Posts: 5,470
|
|
Elite Member
Join Date: Dec 2009
Location: California
Posts: 5,470
|
Got some work done this weekend..
This Labor Day weekend I did a little wheelin and exploring with Driffter33 and then got some work done on the truck. Sat. we went to Big Bear and checked out a few trails we have never ran before and found a couple new ones to check out next time.
Then on Sun., I went down to Driffter's house and we installed my new sliders. I had some Trail Gear 58" HREW sliders on the truck for the last few months and they just didn't give me enough protection (both my rear doors can attest to that) so I upgraded to some 4xInnovations 66" DOM sliders with the kick-outs. I have to say I'm very happy with the new ones and how much better they protect.
Rather than cut and grind the old sliders' legs, gussets, and backing plates off my frame, we chose to leave all that stuff on and just cut the sliders off and leave about 3" of each the old legs still attached. Then we fused the new legs (~ 2.5" long) to the old ones. If anyone is planning on changing sliders, I recommend doing it like this...
The way we fused them was run a 5" long smaller diameter pipe (1.5") inside the legs (1.75"). We then ground the ends of the 2 legs (where they come together) creating a "V" to fill in with the weld and also put some notches in each leg to fill with weld for more surface area. For added strength, we also drilled holes in the legs and made "rosette" welds to further attach the inner tube to the outer tube. The great part is that not only was this method way easier than cutting and grinding all the old stuff off the frame, but the legs are now even stronger than normal legs because they are double-walled now.
Sliders cut off..
Inner pipe..
And welded up.. (Don't talk sh!t, it's hard to weld upside-down with a cheap welder in a tight spot, haha). They aren't the prettiest welds in the world, but they're definitely solid. You can see the rosette welds in this pic too...
Here's a little comparison..
BEFORE (Old Trail Gear sliders):
AFTER (New 4xInnovatons) You can see how much longer the are:
Side shot BEFORE:
Side shot AFTER:
Driffter also ordered the same 4xInnov. sliders and we will hopefully be installing his this weekend, along with my long-awaited CBI rear bumper!!
And since I was off work today (Mon.) for Labor Day, I installed my new IPF off road lights I got from Toytec..
__________________
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
Last edited by brian2sun; 09-06-2010 at 09:34 PM.
|
|
Reply With Quote
|
09-06-2010, 09:55 PM
|
#70
|
|
Senior Member
|
|
Join Date: Jul 2009
Location: SoCal
Posts: 1,788
|
|
Senior Member
Join Date: Jul 2009
Location: SoCal
Posts: 1,788
|
I think your welds look as good if not better than the ones on the new sliders. Nice job!
__________________
1996 SR5 4Runner V6 4WD Auto
Toytec Ultimate w/ OME 890's plus 1.5" daystar spacer
60028 OME shocks, Goodyear Duratracs 265/75 -16
B&M 70268 with Magnefine filter, 199mm TBU
236K miles
|
|
Reply With Quote
|
09-06-2010, 09:56 PM
|
#71
|
|
Senior Member
|
|
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
|
Senior Member
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
No more naked ARB looks good. I will pick up more of the inner pipe this week and maybe get my friend from Colorado to help me get started on my sliders swap. By the way the upper links I welded up with that pos welder held up Sat.
__________________
2000 4RUNNER SR5 TRD Supercharger, OME 882's w/ topout's and n91sport strut up front.OME 851's w/ cones and trekmaster LC shocks in the rear. R.I. LED lighting, retrofit E locker, 1" diff drop, 315/75/16 cooper discoverer STT, 2" R.B. body lift, rear disc brake conversion, Ingen intake, Spectre cone filter, Fitch fuel cat, Cobra LTD29 CB, custom front, and rear bumper, smittybuilt 8000 # winch, 66" 4xinovations rock sliders w/kickout, lil skip's gas tank skid. Custom skid plates. My build thread is @ http://www.toyota-4runner.org/3rd-ge...ld-thread.html
Last edited by driffter33; 09-06-2010 at 10:57 PM.
|
|
Reply With Quote
|
09-06-2010, 10:41 PM
|
#72
|
|
Senior Member
|
|
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
|
Senior Member
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
Looks like some one also found a T4R.ORG sticker recently
__________________
2000 4RUNNER SR5 TRD Supercharger, OME 882's w/ topout's and n91sport strut up front.OME 851's w/ cones and trekmaster LC shocks in the rear. R.I. LED lighting, retrofit E locker, 1" diff drop, 315/75/16 cooper discoverer STT, 2" R.B. body lift, rear disc brake conversion, Ingen intake, Spectre cone filter, Fitch fuel cat, Cobra LTD29 CB, custom front, and rear bumper, smittybuilt 8000 # winch, 66" 4xinovations rock sliders w/kickout, lil skip's gas tank skid. Custom skid plates. My build thread is @ http://www.toyota-4runner.org/3rd-ge...ld-thread.html
|
|
Reply With Quote
|
09-06-2010, 10:44 PM
|
#73
|
|
Elite Member
|
|
Join Date: Dec 2009
Location: California
Posts: 5,470
|
|
Elite Member
Join Date: Dec 2009
Location: California
Posts: 5,470
|
Haha, I was wondering if you were gonna catch that in the pic. Thanks for the sticker!
__________________
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
|
|
Reply With Quote
|
09-06-2010, 10:56 PM
|
#74
|
|
Senior Member
|
|
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
|
Senior Member
Join Date: Mar 2010
Location: Buena Park CA.
Age: 49
Posts: 1,322
|
Quote:
Originally Posted by brian2sun
Haha, I was wondering if you were gonna catch that in the pic. Thanks for the sticker!
|
I missed it earlier when I was on my phone but as soon as I got one the computer I saw it. Your welcome. If you come back down this way and want any stickers made the place I had that made is close to the house and he will make any kind of text sticker you want and he has many different colors, you pick the font you want. Usually you have to go walk around the swap meet for about 15-20 min wile he makes them.
__________________
2000 4RUNNER SR5 TRD Supercharger, OME 882's w/ topout's and n91sport strut up front.OME 851's w/ cones and trekmaster LC shocks in the rear. R.I. LED lighting, retrofit E locker, 1" diff drop, 315/75/16 cooper discoverer STT, 2" R.B. body lift, rear disc brake conversion, Ingen intake, Spectre cone filter, Fitch fuel cat, Cobra LTD29 CB, custom front, and rear bumper, smittybuilt 8000 # winch, 66" 4xinovations rock sliders w/kickout, lil skip's gas tank skid. Custom skid plates. My build thread is @ http://www.toyota-4runner.org/3rd-ge...ld-thread.html
|
|
Reply With Quote
|
09-06-2010, 11:50 PM
|
#75
|
|
Senior Member
|
|
Join Date: Aug 2006
Location: Long Island, NY
Age: 38
Posts: 3,698
Real Name: Bryan
|
|
Senior Member
Join Date: Aug 2006
Location: Long Island, NY
Age: 38
Posts: 3,698
Real Name: Bryan
|
Wow...it's hard to believe you even had those old sliders on there...what are they for? Definitely not 4Runner sliders...
Mine are 68" and are exact fit for the pinch weld, and the kickout is clutch for accessing the roof rack!
You'll be much happier and much more at ease with these sliders on there...nice addition!
__________________
Millennium Silver 2001 4Runner SportR5lander
Photo Timeline - Solid Axle Club
All-Pro, Fox, Eibach, OME, Goodyear, Trail Gear, Yukon, Solo Fabworks, Marlin, TJM, Smittybilt, Front Range Offroad, Inchworm, Addco, Savage Offroad, B&M, Borla, Pioneer, Cobra
Northeast 4Runner Owners Association
|
|
Reply With Quote
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
|