User Tag List
BigFishAllDay

Reply
 
Thread Tools Rating: Thread Rating: 15 votes, 4.73 average. Display Modes
Old 06-30-2010, 09:09 AM #31
Kurtmann415 Kurtmann415 is offline
Junior Member
 
Join Date: Apr 2010
Posts: 4
Kurtmann415 is on a distinguished road
Kurtmann415 Kurtmann415 is offline
Junior Member
 
Join Date: Apr 2010
Posts: 4
Kurtmann415 is on a distinguished road
Quote:
Originally Posted by Ron Helmuth View Post
...
x8 on the sticky for the 3rd gen sub forum. This is a very common failure that if caught before it happens does not have to cost an arm and a leg to fix. edit I don't think even YOTA TECH has a writeup this detailed over there. Would you care to make them aware of it and have it posted up over there? It is stunningly valuable for all 3rd gen owners.
I'm relatively new to the site/4runners in general, pardon a stupid question but

What would the preventative step be to keep the rear axle seal from blowing?

Just replacing the inner seal with the part number ending in a 6?

(I'm looking to buy a 4runner and want to fix problems before they start)

(like external transmission cooler and the rear axle seal)
those seem to be the only 2 common issues i see with the 4runners (well that and their brakes etc)
Kurtmann415 is offline   Reply With QuoteReply With Quote
Old 06-30-2010, 12:36 PM #32
brian2sun's Avatar
brian2sun brian2sun is offline
Elite Member
 
Join Date: Dec 2009
Location: California
Posts: 5,470
brian2sun has a spectacular aura about brian2sun has a spectacular aura about
brian2sun brian2sun is offline
Elite Member
brian2sun's Avatar
 
Join Date: Dec 2009
Location: California
Posts: 5,470
brian2sun has a spectacular aura about brian2sun has a spectacular aura about
Quote:
Originally Posted by Kurtmann415 View Post
I'm relatively new to the site/4runners in general, pardon a stupid question but

What would the preventative step be to keep the rear axle seal from blowing?

Just replacing the inner seal with the part number ending in a 6?

(I'm looking to buy a 4runner and want to fix problems before they start)

(like external transmission cooler and the rear axle seal)
those seem to be the only 2 common issues i see with the 4runners (well that and their brakes etc)
One way to help prevent blowing axle seals is to do the "extended diff breather mod" (search that term). It's an easy mod to do and will help prevent the breather from getting clogged and/or water from going into the diff.
__________________
1997 4Runner 4x4 SR5 - Geared, Locked & Armored
**CLICK FOR '97 BUILD THREAD**
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
brian2sun is offline   Reply With QuoteReply With Quote
Old 07-10-2010, 02:13 AM #33
Ron Helmuth's Avatar
Ron Helmuth Ron Helmuth is offline
Senior Member
 
Join Date: Mar 2007
Location: Denver metro area-CO
Posts: 2,130
Real Name: Uhhh this is my real name
Ron Helmuth is on a distinguished road
Ron Helmuth Ron Helmuth is offline
Senior Member
Ron Helmuth's Avatar
 
Join Date: Mar 2007
Location: Denver metro area-CO
Posts: 2,130
Real Name: Uhhh this is my real name
Ron Helmuth is on a distinguished road
well said brian! thanks for covering the question for me (and BigFish himself)

it is a delight to have you around this forum and Yota Tech.

Particularly since this one does not notify us when a thread is still in action....

Kurtmann415 great idea to get to this stuff before it happens. cheaper and a lot less hassle when you can plan your maintenance.
Ron Helmuth is offline   Reply With QuoteReply With Quote
Old 07-10-2010, 02:20 AM #34
Ron Helmuth's Avatar
Ron Helmuth Ron Helmuth is offline
Senior Member
 
Join Date: Mar 2007
Location: Denver metro area-CO
Posts: 2,130
Real Name: Uhhh this is my real name
Ron Helmuth is on a distinguished road
Ron Helmuth Ron Helmuth is offline
Senior Member
Ron Helmuth's Avatar
 
Join Date: Mar 2007
Location: Denver metro area-CO
Posts: 2,130
Real Name: Uhhh this is my real name
Ron Helmuth is on a distinguished road
thank you thank you thank you CJ3flyer

[QUOTE=CJ3Flyr;578953]Link added here: http://www.toyota-4runner.org/mainte...diys-faqs.html I modified the thread title a bit too...

outstanding work sir! we asked for it and we got it... any chance you could do anything about the non notification issue for members and their threads and/or private messages?

not trying to be pushy but it is quite difficult to use this forum properly without that function.
Ron Helmuth is offline   Reply With QuoteReply With Quote
Old 07-10-2010, 03:26 AM #35
brian2sun's Avatar
brian2sun brian2sun is offline
Elite Member
 
Join Date: Dec 2009
Location: California
Posts: 5,470
brian2sun has a spectacular aura about brian2sun has a spectacular aura about
brian2sun brian2sun is offline
Elite Member
brian2sun's Avatar
 
Join Date: Dec 2009
Location: California
Posts: 5,470
brian2sun has a spectacular aura about brian2sun has a spectacular aura about
Quote:
Originally Posted by Ron Helmuth View Post
well said brian! thanks for covering the question for me (and BigFish himself)

it is a delight to have you around this forum and Yota Tech.

Particularly since this one does not notify us when a thread is still in action....

Kurtmann415 great idea to get to this stuff before it happens. cheaper and a lot less hassle when you can plan your maintenance.
Thanks Ron, I appreciate that. You are definitely a good guy and great resource to have around the 4runner/Toyota community too!

I hope they do fix the notification thing soon, peter78 said today he's still working on trying to figure out why were not getting the emails. For now I've just been going to my User CP page 1st since it at least lists all the threads that have been replied to since my last visit. It's not as nice as email notifications, but I can still see who has replied.
__________________
1997 4Runner 4x4 SR5 - Geared, Locked & Armored
**CLICK FOR '97 BUILD THREAD**
2021 Tacoma 4x4 TRD Off Road Double Cab Short Bed (my DD)
2017 4Runner 4x4 Limited (the wife’s)
brian2sun is offline   Reply With QuoteReply With Quote
Old 10-20-2010, 01:31 AM #36
96720_MMA's Avatar
96720_MMA 96720_MMA is offline
Junior Member
 
Join Date: Oct 2010
Location: Hilo, Hawaii
Posts: 2
96720_MMA is on a distinguished road
96720_MMA 96720_MMA is offline
Junior Member
96720_MMA's Avatar
 
Join Date: Oct 2010
Location: Hilo, Hawaii
Posts: 2
96720_MMA is on a distinguished road
Thank you!!

I had recently purchased a 1999 4runner. Going to replace the seals myself and have our machine shop replace the bearings/retainers/snap ring/seal. Thanks to this thread and the incredible write up I have the confidence to do this myself and save some money. Thank you so much for this, I've been researching all over the internet for a write up like this and so far this is the best user write up I have found.

Aloha from Hawaii!
96720_MMA is offline   Reply With QuoteReply With Quote
Old 01-14-2011, 12:15 PM #37
eric.laprad's Avatar
eric.laprad eric.laprad is offline
Junior Member
 
Join Date: Jan 2011
Location: Concord, NC
Posts: 2
eric.laprad is on a distinguished road
eric.laprad eric.laprad is offline
Junior Member
eric.laprad's Avatar
 
Join Date: Jan 2011
Location: Concord, NC
Posts: 2
eric.laprad is on a distinguished road
A blessing of a write-up!

Thanks so much for the awesome write-up on the rear axle seal problem. Without that great piece of work, I was going to drop around $1200 at the dealership. Instead, I replaced the inner seals and O-rings (from Toyota) for about $20.00, and $15.00 more on a seal puller (from Advanced Auto Parts) and pvc pipe (from Lowes) to make a seal installer tool. I'll get some shoes from the dealer and replace them next, because one seems to be freezing to the drum in the mornings of these cold winter months.

Thanks again!
eric.laprad is offline   Reply With QuoteReply With Quote
Old 04-03-2011, 02:56 PM #38
Nelsonmd's Avatar
Nelsonmd Nelsonmd is offline
Senior Member
 
Join Date: Aug 2010
Location: Boston MA
Age: 40
Posts: 3,394
Nelsonmd is on a distinguished road
Nelsonmd Nelsonmd is offline
Senior Member
Nelsonmd's Avatar
 
Join Date: Aug 2010
Location: Boston MA
Age: 40
Posts: 3,394
Nelsonmd is on a distinguished road
Quote:
Originally Posted by eric.laprad View Post
Thanks so much for the awesome write-up on the rear axle seal problem. Without that great piece of work, I was going to drop around $1200 at the dealership. Instead, I replaced the inner seals and O-rings (from Toyota) for about $20.00, and $15.00 more on a seal puller (from Advanced Auto Parts) and pvc pipe (from Lowes) to make a seal installer tool. I'll get some shoes from the dealer and replace them next, because one seems to be freezing to the drum in the mornings of these cold winter months.

Thanks again!
Eric, Can you please delete that photo. It is way too big and causes the text in this thread to span far beyond the screen, making it really unreadable.
__________________
2000 SR5 3.4L V6 Automatic 4x4, e-locker, 175k Miles, Rust
Imp. Jade Mica with Oak Leather Interior, Field Monitor Unit - B&M Tranny Cooler - SG2 - New (to me) rear axle assembly - Goodyear Duratrac 265/75-16 - 1.8" Ironman Front Lift, OME 906/Procomp 9000 Shocks

http://www.toyota-4runner.org/3rd-ge...ld-thread.html
Nelsonmd is offline   Reply With QuoteReply With Quote
Old 06-16-2011, 12:17 PM #39
userid1015 userid1015 is offline
Junior Member
 
Join Date: May 2011
Posts: 4
userid1015 is on a distinguished road
userid1015 userid1015 is offline
Junior Member
 
Join Date: May 2011
Posts: 4
userid1015 is on a distinguished road
I have patented and developed a Rear Axle Bearing Remover tool and ABS Sensor Ring Remover tool that saves the sensor ring and is so easy to use that a girl can do it. E-mail me if you want more information at [email protected]
userid1015 is offline   Reply With QuoteReply With Quote
Old 06-16-2011, 12:23 PM #40
Nelsonmd's Avatar
Nelsonmd Nelsonmd is offline
Senior Member
 
Join Date: Aug 2010
Location: Boston MA
Age: 40
Posts: 3,394
Nelsonmd is on a distinguished road
Nelsonmd Nelsonmd is offline
Senior Member
Nelsonmd's Avatar
 
Join Date: Aug 2010
Location: Boston MA
Age: 40
Posts: 3,394
Nelsonmd is on a distinguished road
Quote:
Originally Posted by userid1015 View Post
I have patented and developed a Rear Axle Bearing Remover tool and ABS Sensor Ring Remover tool that saves the sensor ring and is so easy to use that a girl can do it. E-mail me if you want more information at [email protected]
If you're serious, post some pics of it.
__________________
2000 SR5 3.4L V6 Automatic 4x4, e-locker, 175k Miles, Rust
Imp. Jade Mica with Oak Leather Interior, Field Monitor Unit - B&M Tranny Cooler - SG2 - New (to me) rear axle assembly - Goodyear Duratrac 265/75-16 - 1.8" Ironman Front Lift, OME 906/Procomp 9000 Shocks

http://www.toyota-4runner.org/3rd-ge...ld-thread.html
Nelsonmd is offline   Reply With QuoteReply With Quote
Old 08-22-2011, 10:57 AM #41
Mellow77's Avatar
Mellow77 Mellow77 is offline
Member
 
Join Date: Jan 2011
Location: Farmers Branch, TX
Posts: 499
Mellow77 is on a distinguished road
Mellow77 Mellow77 is offline
Member
Mellow77's Avatar
 
Join Date: Jan 2011
Location: Farmers Branch, TX
Posts: 499
Mellow77 is on a distinguished road
Muchos Gracias Mi Amigo!

Just wanted to say thanks to BigFishAllDay for initiating such a great Thread. I recently found the need to replace both of my rear axle seals as my diff breather had been rusted shut prior to me getting the vehicle. With the help of this info I had no trouble replacing both of my rear seals (along with most of the other wear parts because I'm anal like that) and am pleased to say she's back together and running great!

Next up is the Tundra brake upgrade and I'll be using more of your great material for that.

THANK YOU!
__________________
'99 Millennium Silver Metallic T4R Limited Auto 4-Speed
3.4L 5VZ-FE V6 4x4 with Rear E-Locker

YODA Build Thread
Mellow77 is offline   Reply With QuoteReply With Quote
Old 11-14-2011, 04:02 AM #42
Gnaro's Avatar
Gnaro Gnaro is offline
Junior Member
 
Join Date: Jun 2011
Location: Nor Cal
Posts: 8
Gnaro is on a distinguished road
Gnaro Gnaro is offline
Junior Member
Gnaro's Avatar
 
Join Date: Jun 2011
Location: Nor Cal
Posts: 8
Gnaro is on a distinguished road
5 stars *****

Insanely helpful write up, I just finished my real seals and brakes. Couldn't of done it without your write up.
__________________
Deck plate Mod/MIT/K&N, Loadwarrior+Extension, Cobra75wxst 4' Firestik II, JVC Dbl Din, Full LED interior light conversion,
Gnaro is offline   Reply With QuoteReply With Quote
Old 11-24-2011, 02:34 PM #43
cek77's Avatar
cek77 cek77 is offline
Member
 
Join Date: Oct 2010
Location: Se PA
Posts: 115
cek77 is on a distinguished road
cek77 cek77 is offline
Member
cek77's Avatar
 
Join Date: Oct 2010
Location: Se PA
Posts: 115
cek77 is on a distinguished road
Thumbs up Excellent

Another thank you! Just finished putting it all back together.
__________________
'99 4Runner, Limited, V6, 4x4, 99k, Rear Locker

Last edited by cek77; 11-24-2011 at 10:13 PM.
cek77 is offline   Reply With QuoteReply With Quote
Old 12-04-2011, 07:48 PM #44
BamaDrewski BamaDrewski is offline
Member
 
Join Date: Apr 2008
Location: "Prattvegas" Alabama
Posts: 918
BamaDrewski will become famous soon enough
BamaDrewski BamaDrewski is offline
Member
 
Join Date: Apr 2008
Location: "Prattvegas" Alabama
Posts: 918
BamaDrewski will become famous soon enough
I replaced my rear axle seals today (with great help from this post!) and I could not seem to find the “breather tube” on the rear differential! Any one have a photo of this? (I have a 2000 4WD limited)

While I was working on the axle seals, I also replaced the rear brake shoes and hardware. The drums were fine but nasty from the oil leaking into them. I got everything cleaned and put back together and I noticed something after bleeding and checking the parking brake.

As I live in the south, I got out of the habit of putting on my emergency brake when I stop. When my buddy was pulling on the e-brake so we could adjust it, I noticed the driver’s side lever into the rear drum was frozen. We pulled the tire and drum off and it turns out that by not using the e-brake on a regular basis, the lever was frozen in place. After some PB blaster and a screwdriver and hammer forcing it back and forth, it works like a charm. I will use my brake regularly now. (Got out of the habit when it froze to the drum when I lived in upstate New York)

For what it is worth, I have great brakes now! WOW – what a difference. I bought Wagner Thermo Quiet brake shoes with a 20% online discount from Advance (Code P20) and after about 40 miles of mileage on them, they are really impressive. The Toyota Dealer wanted $92 for the OEM brakes shoes and with money tight, I chose the Wagners. I think (so far) it was a great choice!
BamaDrewski is offline   Reply With QuoteReply With Quote
Old 01-28-2012, 08:11 PM #45
Drcoffee's Avatar
Drcoffee Drcoffee is offline
Senior Member
 
Join Date: Jan 2012
Location: Somewhere, yet nowhere
Posts: 1,749
Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice
Drcoffee Drcoffee is offline
Senior Member
Drcoffee's Avatar
 
Join Date: Jan 2012
Location: Somewhere, yet nowhere
Posts: 1,749
Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice Drcoffee is just really nice
I am new to 4runners and hopefully I will be buying one soon. I need to ask, is the gear oil really pushing thru the bearing or just leaking between the axle housing and brake backing plate? It is hard to tell from the pictures. Also, if you clear the diff breather, does that stop the oil from leaking out of the seals?

Thanx
__________________
2007 4Runner Sport 4WD 4.0L 228,000 miles
The real stats on gun murders in America compared to the world (link)
Good riddance to the Clinton Crime Family--> I Voted TRUMP…how’s it going for you now Trump is gone? Be careful what you ask for. You may just get it.
Drcoffee is offline   Reply With QuoteReply With Quote
Reply

Tags
axle , leaking , rear , replacement , seals

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 05:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020