Installed the Door Check on the drivers side tonight...very easy.
1. Remove armrest panel...just pry up with a straight slot (remove screw)
2. Remove small plastic cover under door opener..(remove screw)
3. Lightly pull with fingers on the door panel...it popped out. The retaining clips can be used over and the panel is now removed from door. Slide slightly up and move right to left...panel will now only be held to door by the cannon plugs that attach to the speaker, window modulator etc....disconnect them.
4. Door panel was then hung with a bungee cord to support door panel.
5. Remove speaker....4 screws. Lift up and out, it will come out with some effort.
6. Reach your hand up in the speaker hole and remove the door check by unscrewing the 2 bolts that hold it to the door panel. Remove bolt that holds the door check to car frame and pull out of the speaker hole.
7. Reverse order to put in, I put some lockTite on the bolts and made sure they were not going anywhere. I aligned everything back up and then when it was all set...tightened everything down.
Pretty simple fix....can't believe I waited a year to do this!