Update.
Two new Ebay keys found
here... seller siremotes
PDF Page 8, instructions clarified here:
Quote:
Originally Posted by Skiman254
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
This is where I got my keys from. I would recommend getting two and only having ONE cut at a time. I had both cut at the same time the first time around and they were both cut wrong.
Then I went to Jim Barkley in Asheville, NC and had them cut for FREE! That was unexpected
Then programed them myself
1. Take the new key and one master key that can start your 4runner(old key) into the 4runner with you and close the driver's door.(immobilizer light should be blinking)
2. Insert old key, remove old key, Insert old key, remove old key,
Insert old key, remove old key, Insert old key, remove old key,
Insert old key (immobilizer light should be off from the first insertion)
3. open and close driver's door six times (immobilizer light should be off)
Step 2 and 3 need to be done in less than 35 seconds(pdf says 35 seconds)
4.remove the old key. (immobilizer light should come on(steady on, not blinking))
5. insert the new key(immobilizer light should be blinking)
Then just sit there and wait, after about one minute the blinking immobilizer light should go off and you're done.
Same as the above post without having to read all the technically stuff.
Good Luck!
|
And with this video:
Two keys are now programmed.
Local dealer was cool about cutting them for the VIN for $10.
And last but not least, the key now works in the door and liftgate, and NO LONGER PULLS OUT IN ACC!
__________________
2005 SR5 V8 06-09 OEM tail swap | HCF Delete | Camry Homelink Console | Ashtray door degunk
| 5100s F/R (.85) | 2010 FJ coils F/R | Spraybomb Black FJ Wheels | 265/70-17 Duratrac
Planned: Upgrade JBL with BT | Aux lighting | 5k Heads | 3k Fogs