Member
|
|
Join Date: Jul 2012
Location: Ventura, CA
Posts: 73
|
|
Member
Join Date: Jul 2012
Location: Ventura, CA
Posts: 73
|
All fuses good - no trailer running lights
This no running lights for trailer is driving me nuts. I knew that I had a short in my trailer running lights when I got home after a trip (a clearance light got crushed) and noticed the running lights were out. No LED on the 7 to 4 pin converter that plugs into the stock lighting 7 pin socket. That did not surprise me, figured I'm looking for a blown fuse. Checked all the fuses in the fuse block under the hood - 1) Towing Brk 30A, 2) Towing 40A, 3) Towing 30A as is the Tail 10A in the little panel above the emergency brake. Not the fuse? I ordered a replacement "converter" the one buried in the panel above the rear tire fender behind the trim. Replaced it....nothing. No running lights.
I can always run a jumper from the wires one of the rear running lights to the harness just before the 7 pin connector, but I would like to actually find and fix the problem.
The posts I have seen talk about the converter and the fuses, but those are all new, so where do I start looking at this point?
2003 w/ factory tow light package
thanks
tony
|