Quote:
Originally Posted by Drift Monkey
The “molex” bi-xenon connector plugs into the solenoid on the projector and the other side should be 9005 which connects to the stock harness. The splitter splits this in 2 - one side 9005 that connects to the harness and the 2 other sides go to either the solenoid or the stock high beam.
|
DM is correct. I have an 03 with Morimoto Mini H1s with a high beam splitter so I can try and get you some pictures later. Another way to put it, if you orient the high beam splitter like the letter "Y", the bottom of the "Y" goes to your stock high beam harness and then one branch of the "Y" goes to the projector solenoid and the other branch of the "Y" goes to your high beam bulb.