User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-23-2020, 12:06 AM #1
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Brake Accumulator, Pump, and loud alarm

My ABS pump on my 2004 has been squealing for a while. The pump would run and end with a squeal. I figured it was the ABS pump motor wearing out due to a leaking accumulator. Eventually, the pump gave out all together. This was accompanied by the high pitched brake warning alarm.

I swapped out the pump and accumulator, and the alarm is still on. Techstream shows that the accumulator is not building pressure. The pump just runs and runs. My question is, could air trapped in the lines be causing this? I did a round of brake bleeding using techstream, but the high pitched alarm was driving us crazy, even with ear protection. If we just need to keep on bleeding then no worries, but would this cause the pump to keep running?

Is there anything else to check? There is a spring and pin that goes in the housing where the accumulator mounts, and visually these seemed ok. Could they be the culprit? Could the new accumulator be faulty?
__________________
2004 V8
Goldish is offline   Reply With QuoteReply With Quote
Old 07-23-2020, 10:36 AM #2
Bossman's Avatar
Bossman Bossman is offline
Senior Member
 
Join Date: Jun 2008
Location: North Bay, ON, Canada
Posts: 1,632
Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light
Bossman Bossman is offline
Senior Member
Bossman's Avatar
 
Join Date: Jun 2008
Location: North Bay, ON, Canada
Posts: 1,632
Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light Bossman is a glorious beacon of light
Maybe some info in these threads:

Help: VSC/TRAC/ABS/BRAKE lights on plus loud, continuous alarm?

WARNING! Brakes, ABS, loud annoying warning noise....

Brakes went out this morning! HELP!

2003 v8 4runner ABS Pump Problem! Any Solutions?

Brake Actuator failure

2003 v8 brake booster pump diy fix
__________________
2011 Limited 4WD with NAV: "CDN Package" (running boards, mud guards, all-weather mats, cargo liner, block heater).
Summer: Michelin Defender LTX 245/60R20 on OEM Limited 20" rims / Winter: Toyo Observe GSi-5 265/70R17 on 2018 TRD Off-Road 17" rims.

Previous: 2003 4Runner Limited 4WD V8; 1997 Lexus LS400; 1997 Camry CE; 1988 Celica Turbo 4WD; 1982 Celica GT
Bossman is offline   Reply With QuoteReply With Quote
Old 07-23-2020, 09:05 PM #3
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Thanks, I've had tabs open on most of those and I went through the ones I hadn't read yet. That's what led me to believe in the new pump and accumulator.
__________________
2004 V8
Goldish is offline   Reply With QuoteReply With Quote
Old 07-25-2020, 04:47 PM #4
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
I bled the heck out of the brakes. The alarm quit for a while during the process (and no codes picked up by techstream). The pump never turned off. Alarm turned on again before I finished. Same codes saying the accumulator isn't building up pressure. Any ideas are welcome, but at this point it looks like I wasted my money replacing the pump and accumulator, and should have gone with a whole master cylinder unit. I suppose it's possible that the new accumulator is bad, but that seems unlikely and I don't know of any way to test that without throwing another accumulator at it. I don't fully understand the way this system works, but I am wondering if my problem is internal to the accumulator/pump housing, or the master cylinder.
__________________
2004 V8
Goldish is offline   Reply With QuoteReply With Quote
Old 07-26-2020, 09:40 PM #5
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
Goldish Goldish is offline
Junior Member
 
Join Date: May 2019
Location: Not LA, Not the Bay
Posts: 17
Goldish is on a distinguished road
I have kept going with the bleeding using techstream. Mostly air is coming out. I tried with the car on and holding the pedal down to let the pump work the air out of the rears. Pretty much a solid stream of VERY aerated brake fluid, like foam. I read another thread where someone said they had to flush $100 of fluid before they got rid of all the air and foamy fluid. I guess I will just keep going. My worry is that air is getting into the system somehow and I'm wasting my time and money on fluid. I can't find any leaks that indicate this is happening. Throughout all of this, the pump runs about 3 seconds on, 3 seconds off. The high pitched alarm remains on. Only updating in case someone has some wisdom or something else to try.
__________________
2004 V8
Goldish is offline   Reply With QuoteReply With Quote
Old 07-26-2021, 01:33 AM #6
earthrealm earthrealm is offline
Senior Member
 
Join Date: Jan 2012
Location: darkside of the moon
Posts: 1,549
earthrealm will become famous soon enough earthrealm will become famous soon enough
earthrealm earthrealm is offline
Senior Member
 
Join Date: Jan 2012
Location: darkside of the moon
Posts: 1,549
earthrealm will become famous soon enough earthrealm will become famous soon enough
Quote:
Originally Posted by Goldish View Post
I have kept going with the bleeding using techstream. Mostly air is coming out. I tried with the car on and holding the pedal down to let the pump work the air out of the rears. Pretty much a solid stream of VERY aerated brake fluid, like foam. I read another thread where someone said they had to flush $100 of fluid before they got rid of all the air and foamy fluid. I guess I will just keep going. My worry is that air is getting into the system somehow and I'm wasting my time and money on fluid. I can't find any leaks that indicate this is happening. Throughout all of this, the pump runs about 3 seconds on, 3 seconds off. The high pitched alarm remains on. Only updating in case someone has some wisdom or something else to try.
replace the piston assy in the MC

2008 4runner Master Cylinder piston, I found the part # and fixed it!!!
__________________
2005 v6, galactic grey 4wd auto : pioneer avh 4400bh dvd hu, pyle reverse cam
2003 rav4 titanuim silver 4wd auto......sold
2004 rav4 titanuim silver 4wd auto : pionneer avhx 5500bt hu, pyle reverse cam
earthrealm is offline   Reply With QuoteReply With Quote
Old 07-26-2021, 08:20 AM #7
rdruss's Avatar
rdruss rdruss is offline
Senior Member
 
Join Date: Oct 2013
Location: illinois
Posts: 1,586
Real Name: Ron
rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold
rdruss rdruss is offline
Senior Member
rdruss's Avatar
 
Join Date: Oct 2013
Location: illinois
Posts: 1,586
Real Name: Ron
rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold rdruss is a splendid one to behold
Quote:
Originally Posted by Goldish View Post
I have kept going with the bleeding using techstream. Mostly air is coming out. I tried with the car on and holding the pedal down to let the pump work the air out of the rears. Pretty much a solid stream of VERY aerated brake fluid, like foam. I read another thread where someone said they had to flush $100 of fluid before they got rid of all the air and foamy fluid. I guess I will just keep going. My worry is that air is getting into the system somehow and I'm wasting my time and money on fluid. I can't find any leaks that indicate this is happening. Throughout all of this, the pump runs about 3 seconds on, 3 seconds off. The high pitched alarm remains on. Only updating in case someone has some wisdom or something else to try.
Be nice to know if/how you solved your problem.
rdruss is offline   Reply With QuoteReply With Quote
Old 03-22-2022, 07:44 PM #8
shoopdagoose shoopdagoose is offline
Junior Member
 
Join Date: Oct 2018
Posts: 4
shoopdagoose is on a distinguished road
shoopdagoose shoopdagoose is offline
Junior Member
 
Join Date: Oct 2018
Posts: 4
shoopdagoose is on a distinguished road
Unhappy Brake Fluid leak and loud alarm

I have encountered the dashboard lights (e-brake, VSC OFF, ABS, VSC TRAC) and the loud continuous alarm inside the cabin, which will turn on for a while and come back on even after turning the car off then back on, as well as after disconnecting the battery. The lights and alarm have turned themselves off each time while driving, and I have not been able to get my car scanned while they are on.

I also have a slow brake fluid leak from somewhere around the HBB or Master Cylinder. Brake fluid levels have remained within range because I top it off every so often. The brakes and brake pedal have seemed normal, allowing me to stop as expected, but my fear keeps growing that I will lose that ability.

When turning the car to on (not started) the pump motor runs for a bit then stops. If I press the brake pedal it will only turn on briefly, then back off.

I have found results explaining the lights and noise could range from a missing screw causing the wiring system to lose it's ground...all the way up to a $3-4k replacement of the entire HBB/Master Cylinder assembly.

I need help.
How can I locate the leak?
What do the lights and alarm mean?
shoopdagoose is offline   Reply With QuoteReply With Quote
Old 03-23-2022, 02:20 PM #9
mkscrewy mkscrewy is offline
Member
 
Join Date: Sep 2019
Location: brooklyn
Posts: 63
mkscrewy is on a distinguished road
mkscrewy mkscrewy is offline
Member
 
Join Date: Sep 2019
Location: brooklyn
Posts: 63
mkscrewy is on a distinguished road
I'm not sure where to start with the leaks, but I had the same lights/alarm when my accumulator went bad. It is possible to only buy the accumulator and have that replaced, as most of my research (on this site) showed that the accumulator is the part that most often goes bad. You may not have to shell out the $2100 for the whole brake booster assembly. I first bought a reman'd booster motor and accumulator, but that quickly proved to be faulty as well. I went back and picked up this part new:
#47070-30060 2003-2009 Toyota 4Runner - Power Brake Booster $689.38
__________________
2004 v8 | bilstein 5100s | ome883 + wheelers t12 | 2013 FJ cruiser wheels
mkscrewy is offline   Reply With QuoteReply With Quote
Reply

Tags
accumulator , alarm , bleeding , brake , pump

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help: VSC/TRAC/ABS/BRAKE lights on plus loud, continuous alarm? dannyg 4th Gen T4Rs 39 06-24-2022 07:52 PM
2002 brake failure mater cylinder pump accumulator and motor assembly wrpsuite 3rd gen T4Rs 10 09-05-2019 07:15 AM
Hard Brake Pedal? Brake Accumulator? beatadrum 4th Gen T4Rs 2 02-17-2018 12:33 AM
Brake accumulator buzz?? 05 V8. Ryco4R 4th Gen T4Rs 15 01-16-2015 01:16 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 06:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020