I could use some ideas for chasing down a front end rattle I have. It only presents on rough roads, particularly washboard. I thought it was my broken front skid but I've since replaced it with a Victory4x4 skid. I've also replaced the front brake hardware with new pins and rattle springs. The sway bar bushings look ok but I have new ones on hand to install anyway. Any other ideas? I took a video last weekend and linked it below, at 30 seconds on you can really hear it.
I could use some ideas for chasing down a front end rattle I have. It only presents on rough roads, particularly washboard. I thought it was my broken front skid but I've since replaced it with a Victory4x4 skid. I've also replaced the front brake hardware with new pins and rattle springs. The sway bar bushings look ok but I have new ones on hand to install anyway. Any other ideas? I took a video last weekend and linked it below, at 30 seconds on you can really hear it.
I had a hard time hearing much from that video, but I had a rattle that came out on bumps and washboards, and it was my front upper control arms ball joints. I have aftermarket upper control arms (all pro) and the spherical ball joints go out every couple years and have to be replaced. Good luck!
I thought it was my skid or a loose heat shield at first but I have a new skid and all my heat shields are on tight. I'll check the hood latch. My UCA's are original and they're the next thing I'll be replacing, hopefully this year. I can't really hear it in the cab which is nice but it's a little embarrassing to come rolling down a road rattling like that.