Quote:
Originally Posted by vonRunner
The part you highlighted above (90301-92003) is the o-ring. It's hard to tell from your original photo, but my guess is it's from the actual knuckle seal cup (part# 90316 A0001). If I were you I would replace both the o-ring you posted above and the knuckle seal since you're already in there.
|
Thanks for the reply. I agree that it is the knuckle seal (90316 A0001,
1998-2023 Toyota Seal 90316-A0001 | Toyota Parts). I have ordered from Stealership and will find out.
I'm a little unsure about how to remove the current seal - just hammer it out with a flathead and then tug with pliers? I'm afraid of causing more damage once I start banging around.
There are actually several posts about this. I wasn't sure what the part was called (wheel seal, o-ring, etc?), so I couldn't find those posts. But once I started searching for knuckle seal or the part number above, I found them:
Part ID please?
Replaced CV's, Now have steering knuckle seal issues
Replacement Wheel Bearing - HUB Seal/Dust Seal?
I think this is actually a fairly common issue, but naming that part and thus finding the part number is challenging.