Hey all,

I know people have posted about this but my account would not let me access questions on the specific post, so I have to create my own.

I have a friend with 2019 Tacoma TRD Pro who removed the original front and rear struts and coils with only 500 miles on them.

I have watched several videos and know that the front strut and coils are a direct swap. I believe I will end up getting a 1" or more lift on the front when I switch these out.

My main question is are the rear struts a direct swap between 3rd gen Tacoma and 4th gen 4Runner. I read that the lower bushing might have to be replaced?

Can anyone confirm using a 3rd Gen tacoma rear strut. Did you use the rear coil as well? How much of a lift in the back did you get?

My intention is not for lifting the 4runner but because my original suspension has 212k on it and I can feel every bit of it.

I currently have the XREAS but will just be removing it.

While I'm under there, is there anything else I should look at and replace based on age?

Thanks all!

I did half of this swap. The 3rd gen Taco coilovers exactly leveled my 07. I have replaced the lower bushings in the rear shocks, but haven't installed them yet. Can't speak to the coils as the guy I bought mine off of had leafs. I hope to get the rear shocks installed this next week. If so I will let you know how much if any lift I get.